Re: [RFC PATCH v2 07/31] Documentation: Add binding for kalray,kv3-1-pwr-ctrl

On 20/01/2023 15:09, Yann Sionneau wrote:
> From: Jules Maselbas <[email protected]>
> 
> Add documentation for `kalray,kv3-1-pwr-ctrl` binding.
> 
> Co-developed-by: Jules Maselbas <[email protected]>
> Signed-off-by: Jules Maselbas <[email protected]>
> Signed-off-by: Yann Sionneau <[email protected]>
> ---
> 
> Notes:
>     V1 -> V2: new patch
> 
>  .../kalray/kalray,kv3-1-pwr-ctrl.yaml         | 29 +++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/kalray/kalray,kv3-1-pwr-ctrl.yaml

All the usual comments plus - wrong directory. Power controllers go to
respective power directory.

> 
> diff --git a/Documentation/devicetree/bindings/kalray/kalray,kv3-1-pwr-ctrl.yaml b/Documentation/devicetree/bindings/kalray/kalray,kv3-1-pwr-ctrl.yaml
> new file mode 100644
> index 000000000000..968674bb0c63
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/kalray/kalray,kv3-1-pwr-ctrl.yaml
> @@ -0,0 +1,29 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/kalray/kalray,kv3-1-pwr-ctrl#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Kalray cluster Power Controller (pwr-ctrl)
> +
> +description: |
> +  The Power Controller (pwr-ctrl) control cores reset and wake-up procedure.
> +
> +properties:
> +  compatible:
> +    const: kalray,kv3-1-pwr-ctrl
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    pwr_ctrl: power-controller@a40000 {
> +        compatible = "kalray,kv3-1-pwr-ctrl";
> +        reg = <0x00 0xa40000 0x00 0x4158>;

I really doubt that you tested it... Examples are not run with address
cells 2.


Best regards,
Krzysztof

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit