Re: [PATCH v2 0/3] media: rc: sunxi-cir: support the A523/H728/T527 IR receiver
Andre Przywara <[email protected]>
| Newsgroups | dev.linux.lists.linux-sunxi,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-media |
|---|---|
| Organization | Arm Ltd. |
| Message-ID | <[email protected]> |
On Wed, 22 Jul 2026 16:17:14 -0400 Justin Suess <[email protected]> wrote: Hi Justin, > Sorry for the delay, no worries, thanks for the update. > This is v2 of the series that adds support for the CIR > receiver found in the Allwinner A523/T527/H728 family (sun55i). > > Unlike the previous version of the series, this version has no driver changes, > and just uses a fallback compatible and enables the receiver. > > Tested again on my X96Q Pro+ (H728) TV box with the Google TV remote that > came in the box (using NEC keymap). Was able to press buttons and > get readings from lirc / ir-keytable again. this all looks good to me. As mentioned on the individual patches, I tested this on two boards here. I sent a patch [1] to enable IR on the Avaota board, which goes on top of this series. [1] https://lore.kernel.org/linux-sunxi/[email protected]/T/#u > The series is (re)based on tag v7.2-rc4 on mainline. Please base your submissions on -rc1, that simplifies merging/rebasing for the maintainers, because then all new patches have the same base. Not a particular problem for this series, since everything still applies cleanly, but keep that in mind for future submissions. Cheers, Andre > > Justin Suess (3): > media: dt-bindings: allwinner,sun4i-a10-ir: add A523 compatible > arm64: dts: allwinner: a523: add IR receiver nodes > arm64: dts: allwinner: a523: enable IR receiver on the X96Q Pro+ > > .../media/allwinner,sun4i-a10-ir.yaml | 8 ++++-- > .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 28 +++++++++++++++++++ > .../dts/allwinner/sun55i-h728-x96qpro+.dts | 6 ++++ > 3 files changed, 39 insertions(+), 3 deletions(-) > > > base-commit: 1590cf0329716306e948a8fc29f1d3ee87d3989f