Re: [PATCH v2 0/3] irqchip/sg2042-msi: Set irq type according to DT configuration

On Tue, Aug 26, 2025 at 09:09:13AM +0800, Chen Wang wrote:
> From: Chen Wang <[email protected]>
> 
> The original MSI interrupt type was hard-coded, which was not a good idea.
> Now it is changed to read the device tree configuration and then set the
> interrupt type.
> 
> This patchset is based on irq/drivers branch of tip.
> 
> ---
> 
> Changes in v2:
>   The patch series is based on irq/drivers branch of tip.
> 
>   Reverted the change to obtain params of "msi-ranges"; it's better not to
>   assume the value of "#interrupt-cells" is 2, even though it's known to be
>   the case. Thanks to Inochi for the comments.
> 
> Changes in v1:
>   The patch series is based on irq/drivers branch of tip. You can simply review
>   or test the patches at the link [1].
> 
> Link: https://lore.kernel.org/linux-riscv/[email protected]/ [1]
> ---
> 
> Chen Wang (3):
>   irqchip/sg2042-msi: Set irq type according to DT configuration
>   riscv: sophgo: dts: sg2042: change msi irq type to
>     IRQ_TYPE_EDGE_RISING
>   riscv: sophgo: dts: sg2044: change msi irq type to
>     IRQ_TYPE_EDGE_RISING
> 
>  arch/riscv/boot/dts/sophgo/sg2042.dtsi | 2 +-
>  arch/riscv/boot/dts/sophgo/sg2044.dtsi | 2 +-
>  drivers/irqchip/irq-sg2042-msi.c       | 7 +++++--
>  3 files changed, 7 insertions(+), 4 deletions(-)
> 
> 
> base-commit: 8ff1c16c753e293c3ba20583cb64f81ea7b9a451
> -- 
> 2.34.1
> 

Tested-by: Inochi Amaoto <[email protected]> # Sophgo SRD3-10