Re: [PATCH] virtio-net: introduce TSO limit feature

On Thu, Oct 16, 2025 at 6:03 PM Michael S. Tsirkin <[email protected]> wrote:
>
> On Thu, Oct 16, 2025 at 02:31:46PM +0800, Jason Wang wrote:
> > On Thu, Oct 16, 2025 at 2:17 PM Michael S. Tsirkin <[email protected]> wrote:
> > >
> > > On Thu, Oct 16, 2025 at 01:57:41PM +0800, Jason Wang wrote:
> > > > On Wed, Oct 15, 2025 at 3:27 PM Michael S. Tsirkin <[email protected]> wrote:
> > > > >
> > > > > Thanks for the answers. Some more comments:
> > > > >
> > > > > On Wed, Oct 15, 2025 at 12:29:13PM +0800, Jason Wang wrote:
> > > > > > > >  device-types/net/description.tex | 46 ++++++++++++++++++++++++++++++++
> > > > > > > >  1 file changed, 46 insertions(+)
> > > > > > > >
> > > > > > > > diff --git a/device-types/net/description.tex b/device-types/net/description.tex
> > > > > > > > index 415c7fd..e56df75 100644
> > > > > > > > --- a/device-types/net/description.tex
> > > > > > > > +++ b/device-types/net/description.tex
> > > > > > > > @@ -146,6 +146,9 @@ \subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits
> > > > > > > >   when VIRTIO_NET_F_IPSEC is negotiated. When a device offers IPsec feature, it SHOULD
> > > > > > > >   also offer the VIRTIO_NET_F_OUT_NET_HEADER feature.
> > > > > > > >
> > > > > > > > +\item[VIRTIO_NET_F_HOST_TSO_LIMIT(71)] Device limits the maximum TCP
> > > > > > > > +  length and the number of segments when performing TCP segmentation.
> > > > > > > > +
> > > > > > > >  \end{description}
> > > > > > > >
> > > > > > > >  \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device / Feature bits / Feature bit requirements}
> > > > > > > > @@ -184,6 +187,7 @@ \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device
> > > > > > > >  \item[VIRTIO_NET_F_VQ_NOTF_COAL] Requires VIRTIO_NET_F_CTRL_VQ.
> > > > > > > >  \item[VIRTIO_NET_F_HASH_TUNNEL] Requires VIRTIO_NET_F_CTRL_VQ along with VIRTIO_NET_F_RSS or VIRTIO_NET_F_HASH_REPORT.
> > > > > > > >  \item[VIRTIO_NET_F_RSS_CONTEXT] Requires VIRTIO_NET_F_CTRL_VQ and VIRTIO_NET_F_RSS.
> > > > > > > > +\item[VIRTIO_NET_F_HOST_TSO_LIMIT] Requires VIRTIO_NET_F_HOST_TSO4 or VIRTIO_NET_F_HOST_TSO6
> > > > > > > >  \end{description}
> > > > > > > >
> > > > > > > >  \begin{note}
> > > > > > > > @@ -220,6 +224,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device
> > > > > > > >          le16 rss_max_indirection_table_length;
> > > > > > > >          le32 supported_hash_types;
> > > > > > > >          le32 supported_tunnel_types;
> > > > > > > > +        le32 tso_max_size;
> > > > > > > > +        le32 tso_max_segs;
> > > > > > > >  };
> > > > > > > >  \end{lstlisting}
> > > > > > > >
> > > > > > > > @@ -276,6 +282,19 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device
> > > > > > > >  Encapsulation types are defined in \ref{sec:Device Types / Network Device / Device Operation / Processing of Incoming Packets /
> > > > > > > >  Hash calculation for incoming packets / Encapsulation types supported/enabled for inner header hash}.
> > > > > > > >
> > > > > > > > +The following field, \field{tso_max_size} only exists if
> > > > > > > > +VIRTIO_NET_F_HOST_TSO_LIMIT is set.
> > > > > > > > +It specifies the maximum TCP length
> > > > > > >
> > > > > > > what is TCP length?
> > > > > >
> > > > > > It's defined in the rfc793:
> > > > > >
> > > > > > """
> > > > > >       The TCP Length is the TCP header length plus the data length in
> > > > > >       octets (this is not an explicitly transmitted quantity, but is
> > > > > >       computed), and it does not count the 12 octets of the pseudo
> > > > > >       header.
> > > > > > """
> > > > >
> > > > >
> > > > > But that one is 16 bit so can not exceed 65535.
> > > >
> > > > I just reuse the terminology instead of defining something new.
> > >
> > > Let's use a generic term that will work with big tcp.
> >
> > After glancing at RFC TCP length seems to be the best as TCP header
> > doesn't have a length.
> >
> > Maybe you have something better in mind?
>
>
> Depends on what do you mean by it, exactly.

TCP header length plus the data length. Maybe TCP packet length?

>
> > >
> > > > Note
> > > > that it is only used in pseudo header for csum after device has
> > > > performed TSO. The value in the pseudo header is capped by MTU/MSS.
> > > >
> > > > As replied in another thread, BIG TCP requires more work or features.
> > > > Driver needs to set ip->tot_len 0 with a new gso type to let the
> > > > device know about BIG TCP packet.
> > > >
> > > > >
> > > > > > >
> > > > > > > > of a TSO packet
> > > > > > >
> > > > > > > what is a TSO packet?
> > > > > >
> > > > > > Packet for device to perform TCP segmentation offload.
> > > > >
> > > > > pls define terms before use.
> > > >
> > > > I may miss something but TSO has been widely used in the spec before
> > > > this feature:
> > > >
> > > > """
> > > > \item[VIRTIO_NET_F_GUEST_ECN (9)] Driver can receive TSO with ECN.
> > > > ...
> > > > \item[VIRTIO_NET_F_HOST_TSO4 (11)] Device can receive TSOv4.
> > > > ...
> > > > """
> > >
> > >
> > > Yes but that does not define a "TSO packet".
> >
> > How about a patch beforehand to explain thing like:
> >
> > \item[VIRTIO_NET_F_GUEST_ECN (9)] Driver can receive TSO (TCP
> > Segmentation Offload) with ECN.
>
> That does not define is either?
>
> virtio$ git grep 'TSO packet'
> virtio$

Something like this?

Maybe "TSO packet is the packet that device may segment it into
multiple frames"?


>
>
>
>
>
> > >
> > >
> > > > >
> > > > > > > > that the
> > > > > > > > +device can process.
> > > > > > >
> > > > > > > process in which direction? you mean device can receive?
> > > > > >
> > > > > > It works only for TX (as TSO works only for TX).
> > > > >
> > > > >
> > > > > rest of spec says "device receives from driver"  for this.
> > > > > process is ambiguous
> > > >
> > > > A quick grep doesn't show me things like this, maybe you can point out
> > > > the location. Not a native speaker, but using "device receives from
> > > > driver" is indeed ambiguous for TX.
> > >
> > > Well right near the text you quoted:
> > >
> > > \item[VIRTIO_NET_F_HOST_TSO4 (11)] Device can receive TSOv4.
> > >
> > > \item[VIRTIO_NET_F_HOST_TSO6 (12)] Device can receive TSOv6.
> >
> > Okay, I think you want another to to replace it with
> >
> > \item[VIRTIO_NET_F_HOST_TSO4 (11)] Device can transmit TSOv4.
> >
> > ?
>
>
> "receive" in this context is "receive from driver".
>
>
> TSO is not something that is transmitted on the wire.

Ok.

>
>
>
>
> > >
> > >
> > >
> > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > > >
> > > > > > > > When VIRTIO_NET_F_HOST_UDP_TUNNEL_GSO is set,
> > > > > > > > +it specifies the maximum inner TCP length of a UDP tunnel TSO packet
> > > > > > > > +that the device can process.
> > > > > > >
> > > > > > > Rest of spec talks of " GSO over UDP tunnels packets" is this the same?
> > > > > >
> > > > > > Not exactly the same, this is only for TSO not genreal GSO.
> > > > >
> > > > > rest of spec mostly talks of GSO. in fact virtio tso is a kind of
> > > > > accelerated gso.
> > > >
> > > > This only applies for some specific software datapath like vhost-net.
> > > > But it doesn't apply to others especially the hardware device who will
> > > > do real TSO.
> > >
> > > My point is that once you have said both GSO and TSO in the same
> > > sentence, any reader's eyes have glazed over.
> > >
> > >
> > >
> > >
> > > > > either do the same or add a lot of text
> > > > > explaining tso as opposed to gso.
> > > >
> > > > Is this ok to say "UDP tunnel VIRTIO_NET_HDR_GSO_TCPV4 or
> > > > VIRTIO_NET_HDR_GSO_TCPV6 packet"?
> > >
> > > Do you maybe mean: \field{gso_type} set to VIRTIO_NET_HDR_GSO_TCPV4
> > > or VIRTIO_NET_HDR_GSO_TCPV6
> >
> > Yes.
> >
> > >
> > >
> > >
> > > > >
> > > > > > >
> > > > > > > even if it's actually unused?
> > > > > > >
> > > > > > > this, on the assumption that the length for tunnel is smaller?
> > > > > >
> > > > > > It means the device should have the same limitation for plain TSO and
> > > > > > tunnel TSO.
> > > > >
> > > > > Hmm. I have doubts how it can work given the overhead.
> > > >
> > > > If a device can't afford the same limitation, it can simply not
> > > > advertise this feature. The reason I don't introduce a dedicated
> > > > limitation for tunnel is that there could be more tunnel supported in
> > > > the future, it would be a burden to have a per tunnel type limitation.
> > >
> > > Well presumably the feature is needed no?
> >
> > Yes, but the kernel assumes the same limitation for tunnel and non
> > tunnel one. Having a single limitation simply things or if you stick I
> > can introduce a dedicated one for UDP tunnels.
>
> I don't insist, I think it is worth clarifying though.

Ok how about this:

"""
If a device can not have a single limitation for both plain GSO and
tunnel GSO, it MUST NOT advertise VIRTIO_NET_F_TSO_LIMIT feature.
"""

>
> > >
> > >
> > >
> > > > >
> > > > > > >
> > > > > > > I think this kind of things should be explicit.
> > > > > > >
> > > > > > >
> > > > > > > > +
> > > > > > > > +The following field, \field{tso_max_segs} only exists if
> > > > > > > > +VIRTIO_NET_F_HOST_TSO_LIMIT is set.
> > > > > > > > +It specifies the maximum number of segments that can be produced by
> > > > > > > > +the device after performing segmentation on TSO packet or a UDP tunnel
> > > > > > > > +TSO packet (when VIRTIO_NET_F_HOST_UDP_TUNNEL_GSO is set).
> > > > > > >
> > > > > > > I don't get this field at all. the assumption is that all segments
> > > > > > > are the same size, right? Then it is just based on length?
> > > > > >
> > > > > > It's the device side limitation, for example a device can produce 100
> > > > > > segments at most, even if the tso_max_size is 256K, when MTU is 1500,
> > > > > > the driver can't send a TSO packet whose TCP length is greater than
> > > > > > (1500 - 20 - 20) * 100 = 146K.
> > > > >
> > > > > then "can be produced" is again confusing. device
> > > > > transmits packets but it does not "produce" them as such.
> > > > > maybe you just mean "supported".
> > > >
> > > > I think yes.
> > > >
> > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > +
> > > > > > > >  \devicenormative{\subsubsection}{Device configuration layout}{Device Types / Network Device / Device configuration layout}
> > > > > > > >
> > > > > > > >  The device MUST set \field{max_virtqueue_pairs} to between 1 and 0x8000 inclusive,
> > > > > > > > @@ -326,6 +345,17 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device
> > > > > > > >  The device SHOULD NOT offer VIRTIO_NET_F_CTRL_RX_EXTRA if it
> > > > > > > >  does not offer VIRTIO_NET_F_CTRL_VQ.
> > > > > > > >
> > > > > > > > +If VIRTIO_NET_F_HOST_TSO_LIMIT and VIRTIO_NET_F_MTU have been
> > > > > > > > +negotiated, the device SHOULD set \field{tso_max_size} so that a TCP
> > > > > > > > +segment that fully utilizes the configured MTU can be processed by TSO
> > > > > > > > +(e.g., for IPv4 without options: at least \field{mtu} - 20; for IPv6
> > > > > > > > +without extension headers: at least \field{mtu} - 40). This
> > > > > > > > +recommendation does not account for IPv4 options or IPv6 extension
> > > > > > > > +headers, which reduce the effective segment size.
> > > > > > > > +
> > > > > > > > +If VIRTIO_NET_F_HOST_TSO_LIMIT has been negotiated, the device MUST
> > > > > > > > +set \field{tso_max_segs} to at least 64.
> > > > > > >
> > > > > > > where does this 64 come from? pls document.
> > > > > >
> > > > > > A simple backward compatibility which makes sure the value can make
> > > > > > sure 64K TSO can be segmented with 1500 MTU.
> > > > >
> > > > > 2^16/64 == 1024
> > > > >
> > > > > not ~1500
> > > >
> > > > Yes, I just choose one that is sufficient.
> > > >
> > > > >
> > > > > And we don't know MTU is 1500, either.
> > > >
> > > > A typical configuration but I can remove this part.
> > > >
> > > > Thanks
> > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > MST
> > > > >
> > >
> >
> > Thanks
>

Thanks