[Buildroot] [git commit] configs/stm32f469_disco_{sd, xip}: fix boot failure after uClibc bump

commit: https://gitlab.com/buildroot.org/buildroot/-/commit/832ff692ab26e7ab10d86625f13ac9beda7461a2
branch: https://gitlab.com/buildroot.org/buildroot/-/tree/master

Since uClibc was bumped to 1.0.58 (c7fef3704c70, "package/uclibc:
bump to 1.0.58"), the board fails to boot:

    sh: out of memory
    Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
    ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 ]---

The STM32F469 has no MMU, and uClibc's standard malloc() implementation
returns NULL for allocations performed during early init on this target,
causing init to abort immediately.

Fix this by switching to MALLOC_SIMPLE, a plain mmap-based allocator
meant for small/noMMU systems, via the uClibc config fragment already
introduced for the STM32F429 in board/stmicroelectronics/common/stm32f4xx/,
which addresses the same issue on this Cortex-M4/noMMU board.

Signed-off-by: Dario Binacchi <[email protected]>
Signed-off-by: Julien Olivain <[email protected]>
---
 configs/stm32f469_disco_sd_defconfig  | 1 +
 configs/stm32f469_disco_xip_defconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/configs/stm32f469_disco_sd_defconfig b/configs/stm32f469_disco_sd_defconfig
index c58523217e..c0dacd5b0c 100644
--- a/configs/stm32f469_disco_sd_defconfig
+++ b/configs/stm32f469_disco_sd_defconfig
@@ -1,6 +1,7 @@
 BR2_arm=y
 BR2_cortex_m4=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
+BR2_UCLIBC_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/common/stm32f4xx/uclibc-fragment.config"
 BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f469-disco/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh board/stmicroelectronics/stm32f469-disco/post-build.sh"
diff --git a/configs/stm32f469_disco_xip_defconfig b/configs/stm32f469_disco_xip_defconfig
index 9124177193..e642d8d489 100644
--- a/configs/stm32f469_disco_xip_defconfig
+++ b/configs/stm32f469_disco_xip_defconfig
@@ -1,6 +1,7 @@
 BR2_arm=y
 BR2_cortex_m4=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
+BR2_UCLIBC_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/common/stm32f4xx/uclibc-fragment.config"
 # BR2_UCLIBC_INSTALL_UTILS is not set
 BR2_ENABLE_LTO=y
 BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f469-disco/patches"
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot