[Buildroot] [git commit] configs/stm32f429_disco_xip: fix boot failure after uClibc bump

commit: https://gitlab.com/buildroot.org/buildroot/-/commit/72f7aa47e73e9a93dbfa3e4128c0d8e7932edb50
branch: https://gitlab.com/buildroot.org/buildroot/-/tree/master

Since uClibc was bumped to 1.0.58 (c7fef3704c70, "package/uclibc:
bump to 1.0.58"), the board fails to boot:

    sh: out of memory
    Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
    CPU: 0 PID: 1 Comm: init Not tainted 6.1.167 #2
    Hardware name: STM32 (Device Tree Support)
    Function entered at [<0800ea1e>] from [<0800de7b>]
    Function entered at [<0800de7b>] from [<080e4991>]
    Function entered at [<080e4991>] from [<080e2d19>]
    Function entered at [<080e2d19>] from [<080125eb>]
    Function entered at [<080125eb>] from [<08012b09>]
    Function entered at [<08012b09>] from [<08012b69>]
    ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 ]---

The STM32F429 has no MMU, and uClibc's standard malloc() implementation
returns NULL for allocations performed during early init on this target,
causing init to abort immediately.

Fix this by switching to MALLOC_SIMPLE, a plain mmap-based allocator
meant for small/noMMU systems, via a uClibc config fragment. The
fragment is placed under board/stmicroelectronics/common/stm32f4xx/,
rather than under the board-specific directory, so that it can be
shared with the STM32F469, another Cortex-M4/noMMU board affected by
the same issue, which will be fixed in a subsequent patch.

Signed-off-by: Dario Binacchi <[email protected]>
Signed-off-by: Julien Olivain <[email protected]>
---
 board/stmicroelectronics/common/stm32f4xx/uclibc-fragment.config | 2 ++
 configs/stm32f429_disco_xip_defconfig                            | 1 +
 2 files changed, 3 insertions(+)

diff --git a/board/stmicroelectronics/common/stm32f4xx/uclibc-fragment.config b/board/stmicroelectronics/common/stm32f4xx/uclibc-fragment.config
new file mode 100644
index 0000000000..fb8fa9ee01
--- /dev/null
+++ b/board/stmicroelectronics/common/stm32f4xx/uclibc-fragment.config
@@ -0,0 +1,2 @@
+# MALLOC is not set
+MALLOC_SIMPLE=y
diff --git a/configs/stm32f429_disco_xip_defconfig b/configs/stm32f429_disco_xip_defconfig
index 489303b93e..e6edfa9061 100644
--- a/configs/stm32f429_disco_xip_defconfig
+++ b/configs/stm32f429_disco_xip_defconfig
@@ -1,6 +1,7 @@
 BR2_arm=y
 BR2_cortex_m4=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+BR2_UCLIBC_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/common/stm32f4xx/uclibc-fragment.config"
 # BR2_UCLIBC_INSTALL_UTILS is not set
 BR2_ENABLE_LTO=y
 BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f429-disco/patches"
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot