[PATCH 6.12.y-cip 17/19] arm64: dts: renesas: r9a08g046l48-smarc: Enable audio

From: Biju Das <[email protected]>

[ Upstream commit 0d4ed954061efc3e47fa889d3de0675f933f438f ]

Enable audio on the RZ/G3L SMARC EVK by linking SSI0 with the DA7212
audio CODEC.  The SSI0 signals are multiplexed with SD2 and are selected
by switch SW_SD2_EN#.  Add regulator nodes regulator-{1p8v,3p3v} to the
SoM DTSI for reuse by eMMC.

Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Biju Das <[email protected]>
---
 .../boot/dts/renesas/r9a08g046l48-smarc.dts   | 72 +++++++++++++++++++
 .../boot/dts/renesas/rzg3l-smarc-som.dtsi     | 22 ++++++
 2 files changed, 94 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
index 1512b7df39bd..32d3b08a3cf3 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
@@ -9,6 +9,7 @@
 
 /* Switch selection settings */
 #define RZ_BOOT_MODE3		1
+#define SW_SD2_EN		0
 #define SW_DPI_EN		0
 #define SW_GPIO4		1
 #define SW_I3C_EN		0
@@ -38,6 +39,32 @@ aliases {
 		i2c3 = &i2c3;
 		serial3 = &scif0;
 	};
+
+#if !SW_SD2_EN && !SW_I3C_EN
+	snd_rzg3l: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "snd_rzg3l";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssi_link_play: simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&cpu_dai>;
+			frame-master = <&cpu_dai>;
+			mclk-fs = <256>;
+
+			cpu_dai: cpu {
+				sound-dai = <&ssi0>;
+			};
+
+			codec_dai: codec {
+				sound-dai = <&da7212>;
+				clocks = <&versa3 1>;
+			};
+		};
+	};
+#endif
 };
 
 &i2c2 {
@@ -53,6 +80,27 @@ &i2c3 {
 	pinctrl-names = "default";
 
 	status = "okay";
+
+	da7212: codec@1a {
+		compatible = "dlg,da7212";
+		reg = <0x1a>;
+
+		clocks = <&versa3 1>;
+		clock-names = "mclk";
+
+		#sound-dai-cells = <0>;
+
+		dlg,micbias1-lvl = <2500>;
+		dlg,micbias2-lvl = <2500>;
+		dlg,dmic-data-sel = "lrise_rfall";
+		dlg,dmic-samplephase = "between_clkedge";
+		dlg,dmic-clkrate = <3000000>;
+
+		VDDA-supply = <&reg_1p8v>;
+		VDDSP-supply = <&reg_3p3v>;
+		VDDMIC-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
 };
 #endif
 
@@ -71,6 +119,11 @@ &keys {
 };
 
 &pinctrl {
+	audio_clk_pins: audio-clock {
+		pinmux = <RZG3L_PORT_PINMUX(H, 4, 6)>, /* AUDIO_CLK_B */
+			 <RZG3L_PORT_PINMUX(H, 5, 6)>; /* AUDIO_CLK_C */
+	};
+
 	i2c2_pins: i2c2 {
 		pinmux = <RZG3L_PORT_PINMUX(A, 4, 4)>, /* RIIC2_SCL */
 			 <RZG3L_PORT_PINMUX(A, 5, 4)>; /* RIIC2_SDA */
@@ -85,9 +138,28 @@ scif0_pins: scif0 {
 		pins = "SCIF0_TXD", "SCIF0_RXD";
 		power-source = <1800>;
 	};
+
+	ssi0_pins: ssi0 {
+		pinmux = <RZG3L_PORT_PINMUX(H, 0, 9)>, /* SSIF0_RXD */
+			 <RZG3L_PORT_PINMUX(H, 1, 9)>, /* SSIF0_BCK */
+			 <RZG3L_PORT_PINMUX(H, 2, 9)>, /* SSIF0_RCK */
+			 <RZG3L_PORT_PINMUX(H, 3, 9)>; /* SSIF0_TXD */
+	};
 };
 
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
 };
+
+#if !SW_SD2_EN
+&ssi0 {
+	clocks = <&cpg CPG_MOD R9A08G046_SSI0_PCLK2>,
+		 <&cpg CPG_MOD R9A08G046_SSI0_PCLK_SFR>,
+		 <&versa3 2>, <&versa3 3>;
+	pinctrl-0 = <&audio_clk_pins>, <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+#endif
diff --git a/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
index 5e58e08e7fad..091a227233cb 100644
--- a/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
@@ -13,6 +13,10 @@
  *      0 - SMARC_I2C_GP is enabled
  *      1 - I3C is enabled
  *
+ * Switch position SYS.4, Macro SW_SD2_EN:
+ *      0 - Select I2S0
+ *      1 - Select SD2
+ *
  * Switch position SYS.5, Macro SW_DPI_EN:
  *      0 - Select multiple SMARC signals active
  *      1 - Select LCD
@@ -41,6 +45,24 @@ memory@48000000 {
 		reg = <0x0 0x48000000 0x0 0x78000000>;
 	};
 
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	x2_clk: x2-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-- 
2.43.0