[PATCH i-g-t v1] tests/intel/kms_joiner: vblank test for joiner secondary crtc

In joiner mode, add new subtests to validate vblank events are delivered
on secondary crtc.

Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Santhosh Reddy Guddati <[email protected]>
---
 tests/intel/kms_joiner.c | 94 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/tests/intel/kms_joiner.c b/tests/intel/kms_joiner.c
index dfcb24004..ff33256a3 100644
--- a/tests/intel/kms_joiner.c
+++ b/tests/intel/kms_joiner.c
@@ -76,6 +76,10 @@
  * SUBTEST: basic-max-non-joiner
  * Description: Validate basic max non-joiner modeset by selecting the max mode
  *		supported on single pipe.
+ *
+ * SUBTEST: vblank-joiner-secondary
+ * Description: Verify that vblank interrupts are generated on all pipes in a
+ *		joiner configuration including the secondary pipe.
  */
 IGT_TEST_DESCRIPTION("Test joiner / force joiner");
 
@@ -275,6 +279,74 @@ static void switch_modeset_ultra_joiner_big_joiner(data_t *data, igt_output_t *o
 	}
 }
 
+static void test_joiner_vblank(data_t *data, bool force_joiner)
+{
+	int i;
+	enum pipe pipe, master_pipe;
+	uint32_t available_pipe_mask = BIT(data->n_pipes) - 1;
+	igt_output_t *output;
+	igt_plane_t *primary;
+	igt_output_t **outputs;
+	igt_fb_t fb;
+	drmModeModeInfo *mode;
+	int count;
+	drmVBlank wait_vbl;
+	uint32_t pipe_flag;
+
+	outputs = force_joiner ? data->non_big_joiner_output : data->big_joiner_output;
+	count = force_joiner ? data->non_big_joiner_output_count : data->big_joiner_output_count;
+	igt_display_reset(&data->display);
+	igt_display_commit2(&data->display, COMMIT_ATOMIC);
+
+	for (i = 0; i < count; i++) {
+		output = outputs[i];
+		for (pipe = 0; pipe < data->n_pipes - 1; pipe++) {
+			igt_crtc_t *primary_crtc, *secondary_crtc;
+			int ret;
+
+			master_pipe = setup_pipe(data, output, pipe, available_pipe_mask);
+			if (master_pipe == PIPE_NONE)
+				continue;
+
+			mode = igt_output_get_mode(output);
+			primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+			igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+					      DRM_FORMAT_XRGB8888,
+					      DRM_FORMAT_MOD_LINEAR, &fb);
+			igt_plane_set_fb(primary, &fb);
+			igt_display_commit2(&data->display, COMMIT_ATOMIC);
+
+			primary_crtc = igt_crtc_for_pipe(&data->display, master_pipe);
+			secondary_crtc = igt_crtc_for_pipe(&data->display, master_pipe + 1);
+
+			/* Verify vblank works on the primary joiner pipe */
+			igt_wait_for_vblank(primary_crtc);
+			igt_info("Pipe %s (primary): vblank wait OK\n",
+				 kmstest_pipe_name(master_pipe));
+
+			/* Verify vblank works on the secondary joiner pipe */
+			pipe_flag = kmstest_get_vbl_flag(secondary_crtc->crtc_index);
+			memset(&wait_vbl, 0, sizeof(wait_vbl));
+
+			wait_vbl.request.type = DRM_VBLANK_RELATIVE | pipe_flag;
+			wait_vbl.request.sequence = 1;
+			ret = drmWaitVBlank(data->drm_fd, &wait_vbl);
+
+			igt_assert_f(ret == 0,
+				     "Pipe %s (joiner secondary): vblank wait timed out - "
+				     "no vblank interrupt delivered\n",
+				     kmstest_pipe_name(master_pipe + 1));
+			igt_info("Pipe %s (secondary): vblank wait OK\n",
+				 kmstest_pipe_name(master_pipe + 1));
+
+			igt_plane_set_fb(primary, NULL);
+			igt_output_set_crtc(output, NULL);
+			igt_display_commit2(&data->display, COMMIT_ATOMIC);
+			igt_remove_fb(data->drm_fd, &fb);
+		}
+	}
+}
+
 static void test_single_joiner(data_t *data, int output_count, bool force_joiner)
 {
 	int i;
@@ -836,6 +908,28 @@ int igt_main()
 			test_basic_max_non_joiner(&data);
 	}
 
+	igt_describe("Verify vblank interrupts arrive on joiner secondary pipes");
+	igt_subtest_with_dynamic("vblank-joiner-secondary") {
+		igt_require_f(data.n_pipes >= 2, "Minimum 2 pipes required\n");
+		igt_require_f(data.big_joiner_output_count > 0 ||
+			      data.non_big_joiner_output_count > 0,
+			      "No big joiner or force big joiner output found\n");
+
+		if (data.big_joiner_output_count > 0) {
+			igt_dynamic_f("big-joiner") {
+				test_joiner_vblank(&data, false);
+			}
+		}
+
+		if (data.non_big_joiner_output_count > 0) {
+			igt_dynamic_f("force-big-joiner") {
+				enable_force_joiner_on_all_non_big_joiner_outputs(&data);
+				test_joiner_vblank(&data, true);
+				igt_reset_connectors();
+			}
+		}
+	}
+
 	igt_fixture() {
 		igt_display_fini(&data.display);
 		drm_close_driver(data.drm_fd);
-- 
2.43.0