[PATCH] ASoC: meson: aiu: fifo-spdif: soft reset the S/PDIF datapath on start/stop

Christian Hewitt <[email protected]>
Newsgroups org.infradead.lists.linux-amlogic,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-kernel,org.kernel.vger.linux-sound
Message-ID <[email protected]>
The I2S FIFO soft-resets its fast domain on start (AIU_RST_SOFT bit 0 +
AIU_I2S_SYNC read in aiu_fifo_i2s_trigger), mirroring the downstream
vendor driver's audio_out_i2s_enable(). The S/PDIF FIFO has no equivalent:
it only toggles the IEC958 DCU, so a stale datapath FIFO can be replayed,
producing the "machine gun noise" buffer underrun - on start when switching
outputs, and on stop when playback ends. The latter is audible on devices
with an always-on S/PDIF-fed DAC (e.g. the ES7144 on the WeTek Play2).

The vendor driver resets the IEC958 fast domain (AIU_RST_SOFT bit 2) on
both enable and disable (audio_hw_958_enable), and when reconfiguring
(audio_hw_958_reset clears AIU_958_DCU_FF_CTRL then resets). Do the same:
reset before enabling the DCU on start, and after disabling it on stop.

Signed-off-by: Christian Hewitt <[email protected]>
---
 sound/soc/meson/aiu-fifo-spdif.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/meson/aiu-fifo-spdif.c b/sound/soc/meson/aiu-fifo-spdif.c
index e0e00ec026dc..826055a71421 100644
--- a/sound/soc/meson/aiu-fifo-spdif.c
+++ b/sound/soc/meson/aiu-fifo-spdif.c
@@ -24,6 +24,7 @@
 #define AIU_MEM_IEC958_CONTROL_MODE_16BIT	BIT(7)
 #define AIU_MEM_IEC958_CONTROL_MODE_LINEAR	BIT(8)
 #define AIU_MEM_IEC958_BUF_CNTL_INIT		BIT(0)
+#define AIU_RST_SOFT_958_FAST			BIT(2)
 
 #define AIU_FIFO_SPDIF_BLOCK			8
 
@@ -68,12 +69,16 @@ static int fifo_spdif_trigger(struct snd_pcm_substream *substream, int cmd,
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		snd_soc_component_write(component, AIU_RST_SOFT,
+					AIU_RST_SOFT_958_FAST);
 		fifo_spdif_dcu_enable(component, true);
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 	case SNDRV_PCM_TRIGGER_STOP:
 		fifo_spdif_dcu_enable(component, false);
+		snd_soc_component_write(component, AIU_RST_SOFT,
+					AIU_RST_SOFT_958_FAST);
 		break;
 	default:
 		return -EINVAL;
-- 
2.43.0


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.