Re: [PATCH v2 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings

On 20/08/2026 08:38, Xianwei Zhao wrote:
> Hi Krzysztof,
>     Thanks for your review.
> 
> On 2026/8/13 16:28, Krzysztof Kozlowski wrote:
>> On Tue, Aug 11, 2026 at 08:37:43AM +0000, Xianwei Zhao wrote:
>>> Document the thermal controller compatibles for the Amlogic A9 SoC.
>>>
>>> Describe the required "core" and "plck" clocks, add the optional
>>> "amlogic,hw-reset-temp" property, and update the schema constraints for
>>> A9-specific thermal controllers.
>>>
>>> Signed-off-by: Xianwei Zhao<[email protected]>
>>> ---
>>>   .../bindings/thermal/amlogic,thermal.yaml          | 28 +++++++++++++++++++++-
>>>   1 file changed, 27 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
>>> index 8cfa44dcda58..f73ee66bcc47 100644
>>> --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
>>> +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
>>> @@ -23,6 +23,7 @@ properties:
>>>             - const: amlogic,g12a-thermal
>>>         - enum:
>>>             - amlogic,a1-cpu-thermal
>>> +          - amlogic,a9-thermal
>>>             - amlogic,t7-thermal
>>>
>>>     reg:
>>> @@ -32,7 +33,13 @@ properties:
>>>       maxItems: 1
>>>
>>>     clocks:
>>> -    maxItems: 1
>>> +    minItems: 1
>>> +    maxItems: 2
>>> +
>>> +  clock-names:
>>> +    items:
>>> +      - const: core
>>> +      - const: pclk
>>>
>>>     power-domains:
>>>       maxItems: 1
>>> @@ -52,6 +59,10 @@ properties:
>>>             - description: phandle to the secure monitor
>>>             - description: sensor index to get specific calibration data
>>>
>>> +  amlogic,hw-reset-temp:
>>> +    description: The hardware-controlled reset temperature value.
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> Thermal zones define that, not custom properties.
>>
> 
> There are some differences here. The thermal zone goes through a 
> software-controlled process and eventually triggers a restart or 
> shutdown. There is some time between the temperature reaching the 
> threshold and the actual restart or shutdown. In contrast, this 

This feels like Linux problem, not binding? Fix Linux.

> attribute configures a hardware-level protection mechanism that directly 
> triggers a restart when the temperature reaches the configured threshold.
> 
> If that's the case, do I also get it from Thermal zones?


Thermal zones define your hardware temperature constraints, not custom
properties.


Best regards,
Krzysztof

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic