Re: [PATCH v2 2/2] arm64: dts: st: add power-domains to sdmmc1 on stm32mp231
Alexandre TORGUE <[email protected]>
| Newsgroups | org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Hi Dario On 5/30/26 15:56, Dario Binacchi wrote: > The sdmmc1 node was introduced early in the SoC bring-up before power > domains were systematically mapped. Add the missing power-domains > property to align it with the rest of the peripheral nodes. > > Signed-off-by: Dario Binacchi <[email protected]> > > --- > > Changes in v2: > - Add patch. Suggested by Sashiko > > arch/arm64/boot/dts/st/stm32mp231.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/boot/dts/st/stm32mp231.dtsi b/arch/arm64/boot/dts/st/stm32mp231.dtsi > index 9e1d240888ff..0feb8943efae 100644 > --- a/arch/arm64/boot/dts/st/stm32mp231.dtsi > +++ b/arch/arm64/boot/dts/st/stm32mp231.dtsi > @@ -727,6 +727,7 @@ sdmmc1: mmc@48220000 { > cap-mmc-highspeed; > max-frequency = <120000000>; > access-controllers = <&rifsc 76>; > + power-domains = <&cluster_pd>; > status = "disabled"; > }; > Those 2 patches seem already included in the following series: https://lore.kernel.org/all/[email protected]/ regards Alex