[PATCH v3 0/9] arm64: dts: phy: st: usb: Add STM32MP2 USB support

Add USB support for STM32MP23xx/STM32MP25xx SoCs. This includes USB 2.0
FEMTO-PHY driver, DWC3 glue code and DT adjustments. Parts of this are
taken from ST downstream kernel fork, reduced, or rewritten, since not
all of the content there was useful and bits which might be missing and
are useful can be added later.

Unlike the downstream implementation, the DWC3 glue code is using plain
dwc3-generic-plat, the EHCI and OHCI controllers are instantiated as
plain generic controllers without any wrapper glue driver, and the USB2
PHY driver is simplified.

Both USB 2.0 Host controller and DWC3 super-speed controller are tested.

Marek Vasut (6):
  dt-bindings: usb: generic-ehci: Document access-controllers property
  dt-bindings: usb: generic-ohci: Document access-controllers property
  dt-bindings: usb: dwc3: Document ST STM32MP2 DWC3 xHCI USB controller
  usb: dwc3: dwc3-generic-plat: Add ST STM32MP2 DWC3 xHCI USB controller
    glue
  dt-bindings: arm: stm32: Switch st,stm32mp23/25-syscfg into simple-mfd
  arm64: dts: st: Add USB nodes on stm32mp231

Pankaj Dev (3):
  dt-bindings: phy: Document ST STM32MP25 USB2-FEMTO PHY
  phy: stm32: Add support for ST STM32MP25 USB2-FEMTO PHY
  arm64: dts: st: Add USB nodes on stm32mp251

 .../bindings/arm/stm32/st,stm32-syscon.yaml   |  24 +-
 .../bindings/phy/st,stm32-usb2phy.yaml        |  67 +++
 .../devicetree/bindings/usb/generic-ehci.yaml |   3 +
 .../devicetree/bindings/usb/generic-ohci.yaml |   3 +
 .../bindings/usb/st,stm32mp25-dwc3.yaml       |  97 +++++
 arch/arm64/boot/dts/st/stm32mp231.dtsi        |  67 ++-
 arch/arm64/boot/dts/st/stm32mp251.dtsi        |  65 ++-
 drivers/phy/st/Kconfig                        |  10 +
 drivers/phy/st/Makefile                       |   1 +
 drivers/phy/st/phy-stm32-usb2phy.c            | 406 ++++++++++++++++++
 drivers/usb/dwc3/dwc3-generic-plat.c          |  44 ++
 11 files changed, 781 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/st,stm32-usb2phy.yaml
 create mode 100644 Documentation/devicetree/bindings/usb/st,stm32mp25-dwc3.yaml
 create mode 100644 drivers/phy/st/phy-stm32-usb2phy.c

Cc: Alexandre Torgue <[email protected]>
Cc: Christian Bruel <[email protected]>
Cc: Conor Dooley <[email protected]>
Cc: Fabrice Gasnier <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Pankaj Dev <[email protected]>
Cc: Rahul Kumar <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Rosen Penev <[email protected]>
Cc: Thinh Nguyen <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

-- 
2.53.0


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy