Re: [PATCH v7 08/10] accel/rocket: add RK3576 NPU (RKNN) support
Igor Paunovic <[email protected]>
| Newsgroups | org.infradead.lists.linux-rockchip,org.freedesktop.lists.dri-devel,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Hi Jiaxing, A short logistics note so you can plan around me rather than wait on silence: yes to both. I will read what the vendor stack actually programs into the output stage on RK3588 (your option A vs a floor enable), and separately force an output below its zero point through the open stack, so the two explanations get separated on this SoC. I am pairing that with the oc=56/88/120 sweep you asked for earlier, as one measurement session - numbers in the coming days. If either result is going to gate something in your v9 timing, say so and I will reorder. The correction itself, with the control run and the paper-trail rounds behind it, reads solid from here. Regards, Igor _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip