[PATCH] lib: utils/reset: Add litex SoC reset driver

Litex SoC controller supports reboot function by toggling the first
bit of the ctrl register. Add a reset driver so other software can
use it.

Signed-off-by: Inochi Amaoto <[email protected]>
---
 lib/utils/reset/Kconfig            |  5 +++
 lib/utils/reset/fdt_reset_litex.c  | 66 ++++++++++++++++++++++++++++++
 lib/utils/reset/objects.mk         |  3 ++
 platform/generic/configs/defconfig |  1 +
 4 files changed, 75 insertions(+)
 create mode 100644 lib/utils/reset/fdt_reset_litex.c

diff --git a/lib/utils/reset/Kconfig b/lib/utils/reset/Kconfig
index f98926e5..b2ac120e 100644
--- a/lib/utils/reset/Kconfig
+++ b/lib/utils/reset/Kconfig
@@ -24,6 +24,11 @@ config FDT_RESET_HTIF
 	select SYS_HTIF
 	default n

+config FDT_RESET_LITEX
+	bool "LITEX SoC reset driver"
+	depends on FDT_GPIO
+	default n
+
 config FDT_RESET_RPMI
 	bool "RPMI FDT reset driver"
 	depends on FDT_MAILBOX && RPMI_MAILBOX
diff --git a/lib/utils/reset/fdt_reset_litex.c b/lib/utils/reset/fdt_reset_litex.c
new file mode 100644
index 00000000..287745f0
--- /dev/null
+++ b/lib/utils/reset/fdt_reset_litex.c
@@ -0,0 +1,66 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2026 Inochi Amaoto <[email protected]>
+ */
+
+#include <libfdt.h>
+#include <sbi/riscv_io.h>
+#include <sbi/sbi_error.h>
+#include <sbi/sbi_system.h>
+#include <sbi_utils/fdt/fdt_driver.h>
+#include <sbi_utils/fdt/fdt_helper.h>
+
+#define RESET_CTRL			0x0
+
+static volatile u32 *litex_soc_base;
+
+static int litex_reset_check(u32 type, u32 reason)
+{
+	switch (type) {
+	case SBI_SRST_RESET_TYPE_COLD_REBOOT:
+	case SBI_SRST_RESET_TYPE_WARM_REBOOT:
+		return 255;
+	}
+
+	return 0;
+}
+
+static void litex_do_reset(u32 type, u32 reason)
+{
+	writel_relaxed(0x1, litex_soc_base + RESET_CTRL);
+}
+
+static struct sbi_system_reset_device litex_reset = {
+	.name = "litex-reset",
+	.system_reset_check = litex_reset_check,
+	.system_reset = litex_do_reset
+};
+
+static int litex_reset_init(const void *fdt, int nodeoff,
+			    const struct fdt_match *match)
+{
+	uint64_t reg_addr;
+	int rc;
+
+	rc = fdt_get_node_addr_size(fdt, nodeoff, 0, &reg_addr, NULL);
+	if (rc < 0 || !reg_addr)
+		return SBI_ENODEV;
+
+
+	litex_soc_base = (volatile u32 *)(unsigned long)reg_addr;
+
+	sbi_system_reset_add_device(&litex_reset);
+
+	return 0;
+}
+
+static const struct fdt_match litex_reset_match[] = {
+	{ .compatible = "litex,soc-controller" },
+	{ },
+};
+
+const struct fdt_driver fdt_reset_litex = {
+	.match_table = litex_reset_match,
+	.init = litex_reset_init,
+};
diff --git a/lib/utils/reset/objects.mk b/lib/utils/reset/objects.mk
index 3c681c27..38b4e306 100644
--- a/lib/utils/reset/objects.mk
+++ b/lib/utils/reset/objects.mk
@@ -17,6 +17,9 @@ libsbiutils-objs-$(CONFIG_FDT_RESET_GPIO) += reset/fdt_reset_gpio.o
 carray-fdt_early_drivers-$(CONFIG_FDT_RESET_HTIF) += fdt_reset_htif
 libsbiutils-objs-$(CONFIG_FDT_RESET_HTIF) += reset/fdt_reset_htif.o

+carray-fdt_early_drivers-$(CONFIG_FDT_RESET_LITEX) += fdt_reset_litex
+libsbiutils-objs-$(CONFIG_FDT_RESET_LITEX) += reset/fdt_reset_litex.o
+
 carray-fdt_early_drivers-$(CONFIG_FDT_RESET_SG2042_HWMON_MCU) += fdt_reset_sg2042_mcu
 libsbiutils-objs-$(CONFIG_FDT_RESET_SG2042_HWMON_MCU) += reset/fdt_reset_sg2042_hwmon_mcu.o

diff --git a/platform/generic/configs/defconfig b/platform/generic/configs/defconfig
index 818b71f4..969639e3 100644
--- a/platform/generic/configs/defconfig
+++ b/platform/generic/configs/defconfig
@@ -49,6 +49,7 @@ CONFIG_FDT_REGMAP_SYSCON=y
 CONFIG_FDT_RESET=y
 CONFIG_FDT_RESET_ATCWDT200=y
 CONFIG_FDT_RESET_GPIO=y
+CONFIG_FDT_RESET_LITEX=y
 CONFIG_FDT_RESET_HTIF=y
 CONFIG_FDT_RESET_RPMI=y
 CONFIG_FDT_RESET_SG2042_HWMON_MCU=y
--
2.54.0


-- 
opensbi mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/opensbi