Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line

Hi Rob,

On Mon, Sep 9, 2024 at 3:40 PM Rob Herring <[email protected]> wrote:
> On Mon, Sep 9, 2024 at 8:31 AM Geert Uytterhoeven <[email protected]> wrote:
> > On Mon, Sep 9, 2024 at 3:07 PM Rob Herring <[email protected]> wrote:
> > > On Mon, Sep 9, 2024 at 5:58 AM Wolfram Sang
> > > <[email protected]> wrote:
> > > >
> > > > Most I2C controllers do not have a dedicated pin for SMBus Alerts. Allow
> > > > them to define a GPIO as a side-channel.
> > >
> > > Most GPIOs are also interrupts, so shouldn't the existing binding be
> > > sufficient? The exception is if the GPIO needs to be polled.
> >
> > If the GPIO pin supports multiple functions, it must be configured as
> > a GPIO  first. devm_gpiod_get() takes care of that.  Just calling
> > request_irq() does not.  In addition, the mapping from GPIO to IRQ
> > number may not be fixed, e.g. in case the GPIO controller supports
> > less interrupt inputs than GPIOs, and needs to map them when requested.
>
> All sounds like Linux problems...

Let me rephrase in the familiar way: in the case of the latter, the
interrupt number is not a property of the hardware, but depends on
software configuration.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds