Re: [PATCH v1 1/3] dmaengine: dw-edma: Make Xilinx Macros Dev Name Agnostic

On 23-Jul-26 21:06, Frank Li wrote:
> On Thu, Jul 23, 2026 at 03:53:13PM +0530, Verma, Devendra wrote:
>>
>>
>> On 22-Jul-26 20:21, Frank Li wrote:
>>> On Wed, Jul 22, 2026 at 04:46:38PM +0530, Devendra K Verma wrote:
>>>> Xilinx specific macros for MDB device can be reused for the
>>>> Xilinx supported other similar IP such as CPM6.
>>>> Renamed the Xilinx specific macros in a way that can be
>>>> reused for Xilinx supported upcoming IP, CPM6.
>>>> Naming is in accordance with the naming done for Synopsys macros.
>>>>
>>>> Signed-off-by: Devendra K Verma <[email protected]>
>>>> ---
>>>
>>> I don't think it is necessary to remove MDB. You may mention somewhere
>>> CMP6 compatible with MDB. It is quite common in driver.
>>>
>>> The major concerns is that if a incompatible devices appear, such as CMP7,
>>> which have special registers, need add _MDB_ back.
>>>
>>> Frank
>>>
>>
>> The MDB was used cause at that time only Xilinx MDB was the IP to go
>> public.
>> I agree with your suggestion but the idea used here is that, for the
>> common functionalities use the names which are affiliated to vendor
>> that is Xilinx and can be used across the IP having the similarity.
>> In case specific functionality is required for MDB or CPM6 then
>> it can be associated using vendor + device name, that way it is easy
>> to identify which ones are common and specific to the IP.
>>
>> Currently, if any functionality added for MDB ONLY then it would be
>> assumed to be supported on Xilinx CPM6 as well.
> 
> Rename when this case really appear.

OK, I take this suggestion. The channel separation is supported for
CPM6 so the specific macro will be associated with Vendor + Device
name. The rest of the macros could remain generic.
The macro name was kept generic cause the ch_sep_sz for the other
Xilinx devices will always be 0 (256B).

-Devendra

> 
> Frank
> 
>> To remove the confusion
>> extra comment would be required to inform which functionality is
>> supported for which IP. That is why the removal of MDB appoach was taken
>> to reduce the confusion and work. The first approach looked clean.
>>
>> Please let me know your thougths.
>>
>> -Devendra
>>
>>>>    drivers/dma/dw-edma/dw-edma-pcie.c | 58 +++++++++++++++---------------
>>>>    1 file changed, 29 insertions(+), 29 deletions(-)
>>>>
>>>> diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
>>>> index 791c46e8ae4c..ec5e057a0f11 100644
>>>> --- a/drivers/dma/dw-edma/dw-edma-pcie.c
>>>> +++ b/drivers/dma/dw-edma/dw-edma-pcie.c
>>>> @@ -29,21 +29,21 @@
>>>>    #define PCI_DEVICE_ID_XILINX_B054		0xb054
>>>>    #define PCI_DEVICE_ID_XILINX_B00F		0xb00f
>>>>
>>>> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_ID		0x6
>>>> -#define DW_PCIE_XILINX_MDB_VSEC_ID		0x20
>>>> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_BAR		GENMASK(10, 8)
>>>> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_MAP		GENMASK(2, 0)
>>>> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH	GENMASK(9, 0)
>>>> -#define DW_PCIE_XILINX_MDB_VSEC_DMA_RD_CH	GENMASK(25, 16)
>>>> -
>>>> -#define DW_PCIE_XILINX_MDB_DEVMEM_OFF_REG_HIGH	0xc
>>>> -#define DW_PCIE_XILINX_MDB_DEVMEM_OFF_REG_LOW	0x8
>>>> -#define DW_PCIE_XILINX_MDB_INVALID_ADDR		(~0ULL)
>>>> -
>>>> -#define DW_PCIE_XILINX_MDB_LL_OFF_GAP		0x200000
>>>> -#define DW_PCIE_XILINX_MDB_LL_SIZE		0x800
>>>> -#define DW_PCIE_XILINX_MDB_DT_OFF_GAP		0x100000
>>>> -#define DW_PCIE_XILINX_MDB_DT_SIZE		0x800
>>>> +#define DW_PCIE_XILINX_VSEC_DMA_ID		0x6
>>>> +#define DW_PCIE_XILINX_VSEC_ID			0x20
>>>> +#define DW_PCIE_XILINX_VSEC_DMA_BAR		GENMASK(10, 8)
>>>> +#define DW_PCIE_XILINX_VSEC_DMA_MAP		GENMASK(2, 0)
>>>> +#define DW_PCIE_XILINX_VSEC_DMA_WR_CH		GENMASK(9, 0)
>>>> +#define DW_PCIE_XILINX_VSEC_DMA_RD_CH		GENMASK(25, 16)
>>>> +
>>>> +#define DW_PCIE_XILINX_DEVMEM_OFF_REG_HIGH	0xc
>>>> +#define DW_PCIE_XILINX_DEVMEM_OFF_REG_LOW	0x8
>>>> +#define DW_PCIE_XILINX_INVALID_ADDR		(~0ULL)
>>>> +
>>>> +#define DW_PCIE_XILINX_LL_OFF_GAP		0x200000
>>>> +#define DW_PCIE_XILINX_LL_SIZE			0x800
>>>> +#define DW_PCIE_XILINX_DT_OFF_GAP		0x100000
>>>> +#define DW_PCIE_XILINX_DT_SIZE			0x800
>>>>
>>>>    #define DW_BLOCK(a, b, c) \
>>>>    	{ \
>>>> @@ -258,10 +258,10 @@ static void dw_edma_pcie_get_xilinx_dma_data(struct pci_dev *pdev,
>>>>    	u16 vsec;
>>>>    	u64 off;
>>>>
>>>> -	pdata->devmem_phys_off = DW_PCIE_XILINX_MDB_INVALID_ADDR;
>>>> +	pdata->devmem_phys_off = DW_PCIE_XILINX_INVALID_ADDR;
>>>>
>>>>    	vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_XILINX,
>>>> -					DW_PCIE_XILINX_MDB_VSEC_DMA_ID);
>>>> +					DW_PCIE_XILINX_VSEC_DMA_ID);
>>>>    	if (!vsec)
>>>>    		return;
>>>>
>>>> @@ -272,18 +272,18 @@ static void dw_edma_pcie_get_xilinx_dma_data(struct pci_dev *pdev,
>>>>
>>>>    	pci_dbg(pdev, "Detected Xilinx PCIe Vendor-Specific Extended Capability DMA\n");
>>>>    	pci_read_config_dword(pdev, vsec + 0x8, &val);
>>>> -	map = FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_MAP, val);
>>>> +	map = FIELD_GET(DW_PCIE_XILINX_VSEC_DMA_MAP, val);
>>>>    	if (map != EDMA_MF_HDMA_NATIVE)
>>>>    		return;
>>>>
>>>>    	pdata->mf = map;
>>>> -	pdata->rg.bar = FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_BAR, val);
>>>> +	pdata->rg.bar = FIELD_GET(DW_PCIE_XILINX_VSEC_DMA_BAR, val);
>>>>
>>>>    	pci_read_config_dword(pdev, vsec + 0xc, &val);
>>>>    	pdata->wr_ch_cnt = min(pdata->wr_ch_cnt,
>>>> -			       FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH, val));
>>>> +			       FIELD_GET(DW_PCIE_XILINX_VSEC_DMA_WR_CH, val));
>>>>    	pdata->rd_ch_cnt = min(pdata->rd_ch_cnt,
>>>> -			       FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_RD_CH, val));
>>>> +			       FIELD_GET(DW_PCIE_XILINX_VSEC_DMA_RD_CH, val));
>>>>
>>>>    	pci_read_config_dword(pdev, vsec + 0x14, &val);
>>>>    	off = val;
>>>> @@ -293,16 +293,16 @@ static void dw_edma_pcie_get_xilinx_dma_data(struct pci_dev *pdev,
>>>>    	pdata->rg.off = off;
>>>>
>>>>    	vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_XILINX,
>>>> -					DW_PCIE_XILINX_MDB_VSEC_ID);
>>>> +					DW_PCIE_XILINX_VSEC_ID);
>>>>    	if (!vsec)
>>>>    		return;
>>>>
>>>>    	pci_read_config_dword(pdev,
>>>> -			      vsec + DW_PCIE_XILINX_MDB_DEVMEM_OFF_REG_HIGH,
>>>> +			      vsec + DW_PCIE_XILINX_DEVMEM_OFF_REG_HIGH,
>>>>    			      &val);
>>>>    	off = val;
>>>>    	pci_read_config_dword(pdev,
>>>> -			      vsec + DW_PCIE_XILINX_MDB_DEVMEM_OFF_REG_LOW,
>>>> +			      vsec + DW_PCIE_XILINX_DEVMEM_OFF_REG_LOW,
>>>>    			      &val);
>>>>    	off <<= 32;
>>>>    	off |= val;
>>>> @@ -360,7 +360,7 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
>>>>    		 * address use the non-LL mode or simple mode supported by
>>>>    		 * the HDMA IP.
>>>>    		 */
>>>> -		if (vsec_data->devmem_phys_off == DW_PCIE_XILINX_MDB_INVALID_ADDR)
>>>> +		if (vsec_data->devmem_phys_off == DW_PCIE_XILINX_INVALID_ADDR)
>>>>    			non_ll = true;
>>>>
>>>>    		/*
>>>> @@ -370,10 +370,10 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
>>>>    		 */
>>>>    		if (!non_ll)
>>>>    			dw_edma_set_chan_region_offset(vsec_data, BAR_2, 0,
>>>> -						       DW_PCIE_XILINX_MDB_LL_OFF_GAP,
>>>> -						       DW_PCIE_XILINX_MDB_LL_SIZE,
>>>> -						       DW_PCIE_XILINX_MDB_DT_OFF_GAP,
>>>> -						       DW_PCIE_XILINX_MDB_DT_SIZE);
>>>> +						       DW_PCIE_XILINX_LL_OFF_GAP,
>>>> +						       DW_PCIE_XILINX_LL_SIZE,
>>>> +						       DW_PCIE_XILINX_DT_OFF_GAP,
>>>> +						       DW_PCIE_XILINX_DT_SIZE);
>>>>    	}
>>>>
>>>>    	/* Mapping PCI BAR regions */
>>>> --
>>>> 2.43.0
>>>>
>>