Re: [PATCH] dmaengine: xilinx_dma: Fix hardware buffer descriptor reuse order

Frank Li <[email protected]>
Newsgroups org.kernel.vger.dmaengine,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-kernel
Message-ID <aoMQ1Iz21TuUUWfD@SMW015318>
On Mon, Aug 17, 2026 at 11:23:55AM +0200, Alex Bereza wrote:
> [You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> xilinx_dma_alloc_chan_resources() builds a static ring of hardware
> buffer descriptors once and the driver uses this ring throughout the
> lifetime of a channel. This requires the allocation order of hardware
> buffer descriptors from chan->free_seg_list to stay in sync with the
> hardware buffer descriptor ring built at channel allocation time by
> returning oldest descriptors to chan->free_seg_list first.
>
> When chan->pending_list is not empty e.g. during
> xilinx_dma_terminate_all() the chan->free_seg_list and the order of the
> static hardware buffer descriptor ring get out of sync. Descriptors age
> in this order: pending -> active -> done. So freeing pending_list first
> returns the newest buffer descriptors to the chan->free_seg_list first
> and thus breaks the order required by the static hardware buffer
> descriptor ring. Then when the channel is reused, after a wrap around of
> the free_seg_list the DMA will find a hardware buffer descriptor with a
> length field that is still zeroed and stop with something like this:
>
>   xilinx-vdma 86000000.dma: Channel 000000003a21d7b8 has errors 10, cdr 6de4c000 tdr 6de4c000
>
> After this no more descriptors are completed and a consumer potentially
> blocks and waits forever. The only way to get out of this error state is
> to rebuild the static hardware buffer descriptor ring and the
> free_seg_list by releasing and re-acquiring the channel.
>
> Fix the order in which hardware buffer descriptors are returned to
> free_seg_list to ensure the mentioned requirement holds.
>
> Fixes: 23059408b6a3 ("dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario")
> Signed-off-by: Alex Bereza <[email protected]>
> ---

Reviewed-by: Frank Li <[email protected]>

>  drivers/dma/xilinx/xilinx_dma.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index bef2b031dba1..0817b74f7450 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -920,9 +920,9 @@ static void xilinx_dma_free_descriptors(struct xilinx_dma_chan *chan)
>
>         spin_lock_irqsave(&chan->lock, flags);
>
> -       xilinx_dma_free_desc_list(chan, &chan->pending_list);
>         xilinx_dma_free_desc_list(chan, &chan->done_list);
>         xilinx_dma_free_desc_list(chan, &chan->active_list);
> +       xilinx_dma_free_desc_list(chan, &chan->pending_list);
>
>         spin_unlock_irqrestore(&chan->lock, flags);
>  }
>
> ---
> base-commit: 0d995da5fb97e8c312834575604d4423eb6225b7
> change-id: 20260817-fix-hw-buf-desc-reuse-b730e9e02185
>
> Best regards,
> --
> Alex Bereza <[email protected]>
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.