Re: [PATCH 1/7] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen4 ADC

On Fri, Jul 31, 2026 at 11:36:14PM +0530, Jishnu Prakash wrote:
> PMIC5 Gen4 ADC is similar to PMIC5 Gen3 ADC, with several changes made for
> improved performance, mostly at the hardware level. The main differences are
> increased ratiometric conversion resolution (from 14 bits to 16 bits) and
> increased bit field width for PMIC SID (to allow communication with an
> increased number of PMICs, supported on latest SoCs).
> 
> Signed-off-by: Jishnu Prakash <[email protected]>
> ---
>  .../bindings/iio/adc/qcom,spmi-adc5-gen3.yaml      | 47 +++++++++++++++++++++-
>  1 file changed, 46 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml
> index 149f4af8f4b8..e79ddc2acca0 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml
> @@ -21,9 +21,14 @@ description: |
>    All boards using a particular (SOC + master PMIC) combination will have the
>    same number of ADC SDAMs supported on that PMIC.
>  
> +  PMIC5 Gen4 ADC is similar to Gen3 ADC, with some differences such as
> +  improved ratiometric conversion resolution.
> +
>  properties:
>    compatible:
> -    const: qcom,spmi-adc5-gen3
> +    enum:
> +      - qcom,spmi-adc5-gen3
> +      - qcom,spmi-adc5-gen4
>  
>    reg:
>      items:
> @@ -83,6 +88,46 @@ patternProperties:
>            This property indicates ADC_TM monitoring is done on this channel.
>          type: boolean
>  
> +      qcom,adc5-gen4:
> +        description:
> +          Indicates channel is of type ADC5 Gen4. This may be needed in cases where the
> +          master PMIC has an ADC peripheral of type Gen3, but some of the other PMICs it
> +          communicates with have ADC peripherals of type Gen4, so channels of those PMICs
> +          need to be marked as Gen4 to ensure their conversions are handled correctly.
> +        type: boolean

It is implied by the compatibles, in this case the peripheral
compatible.

Best regards,
Krzysztof