[PATCH 3/3] arm64: dts: qcom: rb3gen2: add Industrial BT UART overlay

Add an overlay for the RB3 Gen 2 Industrial mezzanine variant that routes
QCC2072 Bluetooth over UART4 and models the M.2 E-key connector graph
endpoints for PCIe and UART.

The default Industrial mezzanine overlay describes the common mezzanine
hardware. Build this variant by applying the common Industrial mezzanine
overlay first, followed by the BT UART overlay, because the reworked board
keeps the common mezzanine description and only changes the Bluetooth
transport routing.

The overlay also disables the on-board WCN6750 PMU and UART7 path so the
M.2 QCC2072 Bluetooth controller can be used instead.

Signed-off-by: Rahul Samana <[email protected]>
---
 arch/arm64/boot/dts/qcom/Makefile                  |   2 +
 ...s6490-rb3gen2-industrial-mezzanine-bt-uart.dtso | 133 +++++++++++++++++++++
 2 files changed, 135 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6f33c4e2f09c..45786d3db14a 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -179,8 +179,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
 
 qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo
 qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-industrial-mezzanine.dtbo
+qcs6490-rb3gen2-industrial-mezzanine-bt-uart-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-industrial-mezzanine.dtbo qcs6490-rb3gen2-industrial-mezzanine-bt-uart.dtbo
 
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-industrial-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-industrial-mezzanine-bt-uart.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-vision-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-thundercomm-minipc-g1iot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-thundercomm-rubikpi3.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine-bt-uart.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine-bt-uart.dtso
new file mode 100644
index 000000000000..06560df0a719
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine-bt-uart.dtso
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2026 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+&{/} {
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-boot-on;
+	};
+
+	m2_e_connector: m2-e-connector {
+		compatible = "pcie-m2-e-connector";
+		vpcie3v3-supply = <&vreg_wcn_3p3>;
+
+		m2_e_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				m2_e_pcie_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&pcie0_m2_e_ep>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				m2_e_uart_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&uart4_m2_e_ep>;
+				};
+			};
+		};
+	};
+};
+
+&qup_uart4_cts {
+	bias-bus-hold;
+};
+
+&qup_uart4_rts {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart4_rx {
+	bias-pull-up;
+};
+
+&qup_uart4_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&tlmm {
+	qup_uart4_sleep_cts: qup-uart4-sleep-cts-state {
+		pins = "gpio16";
+		function = "gpio";
+		bias-bus-hold;
+	};
+
+	qup_uart4_sleep_rts: qup-uart4-sleep-rts-state {
+		pins = "gpio17";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	qup_uart4_sleep_tx: qup-uart4-sleep-tx-state {
+		pins = "gpio18";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	qup_uart4_sleep_rx: qup-uart4-sleep-rx-state {
+		pins = "gpio19";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&pcie0_port {
+	pcie@0,0 {
+		pcie@2,0 {
+			port {
+				pcie0_m2_e_ep: endpoint {
+					remote-endpoint = <&m2_e_pcie_ep>;
+				};
+			};
+		};
+	};
+};
+
+&uart4 {
+	status = "okay";
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 19 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart4_sleep_cts>, <&qup_uart4_sleep_rts>,
+		    <&qup_uart4_sleep_tx>, <&qup_uart4_sleep_rx>;
+
+	port {
+		uart4_m2_e_ep: endpoint {
+			remote-endpoint = <&m2_e_uart_ep>;
+		};
+	};
+};
+
+&uart7 {
+	status = "disabled";
+};
+
+&{/wcn6750-pmu} {
+	status = "disabled";
+};

-- 
2.34.1