[PATCH 4/6] net: phy: maxio: extend PHY ID matching
Andre Przywara <[email protected]>
| Newsgroups | org.kernel.vger.linux-devicetree,dev.linux.lists.linux-sunxi,org.infradead.lists.linux-arm-kernel,org.kernel.vger.netdev |
|---|---|
| Message-ID | <[email protected]> |
Currently the maxio Ethernet PHY driver expects a PHY matching exactly the one ID provided: 0x7b744412. The Maxio MAE0621A-Q3C model used on the Allwinner based X96QPro+ TV box uses a slightly different PHY ID: 0x7b744411. Replace the "exact match" requirement with the more relaxed "model match" version, which ignores the lowest 4 bits of the PHY ID. Both PHYs should now be recognised by the driver. Signed-off-by: Andre Przywara <[email protected]> --- drivers/net/phy/maxio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/maxio.c b/drivers/net/phy/maxio.c index 5fabf99fb90f..d97fb50cdbe1 100644 --- a/drivers/net/phy/maxio.c +++ b/drivers/net/phy/maxio.c @@ -87,7 +87,7 @@ static int maxio_mae0621a_config_init(struct phy_device *phydev) static struct phy_driver maxio_drivers[] = { { - PHY_ID_MATCH_EXACT(MAXIO_MAE0621A_PHY_ID), + PHY_ID_MATCH_MODEL(MAXIO_MAE0621A_PHY_ID), .name = "Maxio MAE0621A", .probe = maxio_mae0621a_probe, .config_init = maxio_mae0621a_config_init, @@ -100,7 +100,7 @@ static struct phy_driver maxio_drivers[] = { module_phy_driver(maxio_drivers); static const struct mdio_device_id __maybe_unused maxio_tbl[] = { - { PHY_ID_MATCH_EXACT(MAXIO_MAE0621A_PHY_ID) }, + { PHY_ID_MATCH_MODEL(MAXIO_MAE0621A_PHY_ID) }, { } }; MODULE_DEVICE_TABLE(mdio, maxio_tbl); -- 2.43.0