[PATCH v5 05/14] iio: light: lm3533-als: Remove redundant pdata helpers

The lm3533_als_set_input_mode() and lm3533_als_set_resistor() functions
are used only in lm3533_als_setup(). Incorporate their code into
lm3533_als_setup() directly to simplify driver readability.

Signed-off-by: Svyatoslav Ryhel <[email protected]>
---
 drivers/iio/light/lm3533-als.c | 56 ++++++++++------------------------
 1 file changed, 16 insertions(+), 40 deletions(-)

diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index a9af8e2b965f..69bac1b202f1 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -708,55 +708,31 @@ static const struct attribute_group lm3533_als_attribute_group = {
 	.attrs = lm3533_als_attributes
 };
 
-static int lm3533_als_set_input_mode(struct lm3533_als *als, bool pwm_mode)
+static int lm3533_als_setup(struct lm3533_als *als,
+			    const struct lm3533_als_platform_data *pdata)
 {
+	struct device *dev = &als->pdev->dev;
 	int ret;
 
 	ret = regmap_assign_bits(als->regmap, LM3533_REG_ALS_CONF,
-				 LM3533_ALS_INPUT_MODE_MASK, pwm_mode);
-	if (ret) {
-		dev_err(&als->pdev->dev, "failed to set input mode %d\n",
-								pwm_mode);
-		return ret;
-	}
-
-	return 0;
-}
+				 LM3533_ALS_INPUT_MODE_MASK, pdata->pwm_mode);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to set input mode %d\n",
+				     pdata->pwm_mode);
 
-static int lm3533_als_set_resistor(struct lm3533_als *als, u8 val)
-{
-	int ret;
+	/* Bail out when in PWM-mode */
+	if (pdata->pwm_mode)
+		return 0;
 
-	if (val < LM3533_ALS_RESISTOR_MIN || val > LM3533_ALS_RESISTOR_MAX) {
-		dev_err(&als->pdev->dev, "invalid resistor value\n");
-		return -EINVAL;
-	}
+	if (pdata->r_select < LM3533_ALS_RESISTOR_MIN ||
+	    pdata->r_select > LM3533_ALS_RESISTOR_MAX)
+		return dev_err_probe(dev, -EINVAL,
+				     "invalid resistor value\n");
 
 	ret = regmap_write(als->regmap, LM3533_REG_ALS_RESISTOR_SELECT,
-			   val);
-	if (ret) {
-		dev_err(&als->pdev->dev, "failed to set resistor\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-static int lm3533_als_setup(struct lm3533_als *als,
-			    const struct lm3533_als_platform_data *pdata)
-{
-	int ret;
-
-	ret = lm3533_als_set_input_mode(als, pdata->pwm_mode);
+			   pdata->r_select);
 	if (ret)
-		return ret;
-
-	/* ALS input is always high impedance in PWM-mode. */
-	if (!pdata->pwm_mode) {
-		ret = lm3533_als_set_resistor(als, pdata->r_select);
-		if (ret)
-			return ret;
-	}
+		return dev_err_probe(dev, ret, "failed to set resistor\n");
 
 	return 0;
 }
-- 
2.53.0