[PATCH v5 09/14] mfd: lm3533: Add support for VIN power supply

Svyatoslav Ryhel <[email protected]>
Newsgroups org.kernel.vger.linux-fbdev,org.freedesktop.lists.dri-devel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-iio,org.kernel.vger.linux-kernel,org.kernel.vger.linux-leds
Message-ID <[email protected]>
Add support for 2.7V-5.5V VIN power supply.

Signed-off-by: Svyatoslav Ryhel <[email protected]>
---
 drivers/mfd/lm3533-core.c  | 23 +++++++++++++++++++++--
 include/linux/mfd/lm3533.h |  2 ++
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index a5aa7da9668b..4b5d94e9ed27 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -17,6 +17,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
@@ -113,14 +114,25 @@ static int lm3533_set_lvled_config(struct lm3533 *lm3533, u8 lvled, u8 led)
 	return ret;
 }
 
-static void lm3533_enable(struct lm3533 *lm3533)
+static int lm3533_enable(struct lm3533 *lm3533)
 {
+	int ret;
+
+	ret = regulator_enable(lm3533->vin_supply);
+	if (ret) {
+		dev_err(lm3533->dev, "failed to enable vin power supply\n");
+		return ret;
+	}
+
 	gpiod_set_value(lm3533->hwen, 1);
+
+	return 0;
 }
 
 static void lm3533_disable(struct lm3533 *lm3533)
 {
 	gpiod_set_value(lm3533->hwen, 0);
+	regulator_disable(lm3533->vin_supply);
 }
 
 enum lm3533_attribute_type {
@@ -333,7 +345,9 @@ static int lm3533_device_init(struct lm3533 *lm3533)
 		}
 	}
 
-	lm3533_enable(lm3533);
+	ret = lm3533_enable(lm3533);
+	if (ret)
+		return ret;
 
 	ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
 				 LM3533_BOOST_FREQ_MASK,
@@ -447,6 +461,11 @@ static int lm3533_i2c_probe(struct i2c_client *i2c)
 		return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen),
 				     "failed to get HWEN GPIO\n");
 
+	lm3533->vin_supply = devm_regulator_get(lm3533->dev, "vin");
+	if (IS_ERR(lm3533->vin_supply))
+		return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->vin_supply),
+				     "failed to get vin-supply\n");
+
 	device_property_read_u32(lm3533->dev, "ti,boost-ovp-microvolt",
 				 &lm3533->boost_ovp);
 
diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
index 5710e88da45d..8f72dd41e8f0 100644
--- a/include/linux/mfd/lm3533.h
+++ b/include/linux/mfd/lm3533.h
@@ -22,6 +22,7 @@
 struct device;
 struct gpio_desc;
 struct regmap;
+struct regulator;
 
 struct lm3533 {
 	struct device *dev;
@@ -29,6 +30,7 @@ struct lm3533 {
 	struct regmap *regmap;
 
 	struct gpio_desc *hwen;
+	struct regulator *vin_supply;
 
 	u32 boost_ovp;
 	u32 boost_freq;
-- 
2.53.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.