[PATCH v3 7/8] riscv: dts: eswin: add I2C controller support

Pinkesh Vaghela <[email protected]> Tue, 4 Aug 2026 16:14:30 +0530
Newsgroups	org.kernel.vger.linux-i2c,org.infradead.lists.linux-riscv,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID	<[email protected]>
From: Pritesh Patel <[email protected]>

Add I2C nodes for EIC7700 SoC.
Also add nodes for corresponding slave devices in dts file and
enable them for HiFive Premier P550 board

Signed-off-by: Pritesh Patel <[email protected]>
Signed-off-by: Pinkesh Vaghela <[email protected]>
---
 .../dts/eswin/eic7700-hifive-premier-p550.dts |  56 +++++++
 arch/riscv/boot/dts/eswin/eic7700.dtsi        | 156 ++++++++++++++++++
 2 files changed, 212 insertions(+)

diff --git a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
index 3101fd90d171..50c15e08a57f 100644
--- a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
+++ b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
@@ -130,6 +130,62 @@ &gpio111_pins {
 	input-disable;
 };
 
+&aon_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+};
+
+&aon_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	adc@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_SOM";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_SOC";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_CPU";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_LPDDR";
+		};
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina226";
+		reg = <0x44>;
+		#io-channel-cells = <1>;
+		label = "sys_power";
+		shunt-resistor = <1000>;
+	};
+};
+
 &pinctrl {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio0_pins>, <&gpio5_pins>, <&gpio11_pins>,
diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
index 771a88645d83..c13432d14504 100644
--- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -315,6 +315,162 @@ uart4: serial@50940000 {
 			status = "disabled";
 		};
 
+		i2c0: i2c@50950000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x50950000 0x0 0x8000>;
+			interrupts = <105>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C0_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@50960000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x50960000 0x0 0x8000>;
+			interrupts = <106>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C1_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@50970000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x50970000 0x0 0x8000>;
+			interrupts = <107>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C2_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@50980000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x50980000 0x0 0x8000>;
+			interrupts = <108>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C3_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@50990000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x50990000 0x0 0x8000>;
+			interrupts = <109>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C4_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@509a0000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x509a0000 0x0 0x8000>;
+			interrupts = <110>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C5_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@509b0000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x509b0000 0x0 0x8000>;
+			interrupts = <111>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C6_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@509c0000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x509c0000 0x0 0x8000>;
+			interrupts = <112>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C7_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@509d0000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x509d0000 0x0 0x8000>;
+			interrupts = <113>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C8_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c9: i2c@509e0000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x509e0000 0x0 0x8000>;
+			interrupts = <114>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C9_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		aon_i2c0: i2c@51830000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x51830000 0x0 0x8000>;
+			interrupts = <290>;
+			clocks = <&clk EIC7700_CLK_GATE_AON_I2C0_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_ANO0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		aon_i2c1: i2c@51838000 {
+			compatible = "eswin,eic7700-i2c", "snps,designware-i2c";
+			reg = <0x0 0x51838000 0x0 0x8000>;
+			interrupts = <291>;
+			clocks = <&clk EIC7700_CLK_GATE_AON_I2C1_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_ANO1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gpio@51600000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0x0 0x51600000 0x0 0x80>;
-- 
2.34.1