[PATCHv2 5/8] ata: sata_dwc_460ex: fix data race on hsdev->sactive_issued in interrupt handler

hsdev->sactive_issued is written locklessly in sata_dwc_isr() before
acquiring host->lock, while sata_dwc_qc_complete() performs a
read-modify-write on the same field under the lock.  This creates a
data race that can corrupt NCQ tag tracking state.

Move the zero assignment inside the critical section so all accesses
to sactive_issued are serialized by host->lock.

Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <[email protected]>
---
 drivers/ata/sata_dwc_460ex.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 2a28e6655bba..4c54c3ecd18e 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -467,9 +467,9 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
 	int handled, port = 0;
 	uint intpr, sactive, sactive2, tag_mask;
 	struct sata_dwc_device_port *hsdevp;
-	hsdev->sactive_issued = 0;
 
 	spin_lock_irqsave(&host->lock, flags);
+	hsdev->sactive_issued = 0;
 
 	/* Read the interrupt register */
 	intpr = sata_dwc_readl(&hsdev->sata_dwc_regs->intpr);
-- 
2.55.0