[PATCH v2 1/3] dt-bindings: Add InvenSense ICM-42370-p accelerometer

ICM42370P is a 3-axis accelerometer. The device can support I2C, SPI
and I3C. Add the supporting devicetree documentation for I2C as we
have only tested using I2C protocol and leave the reset for future
work.

The device supports VDD and VDDIO operating range of 1.71V to 3.6V.

Signed-off-by: Kanak Shilledar <[email protected]>
---
 .../bindings/iio/accel/invensense,icm42370p.yaml   | 84 ++++++++++++++++++++++
 MAINTAINERS                                        |  8 +++
 2 files changed, 92 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/accel/invensense,icm42370p.yaml b/Documentation/devicetree/bindings/iio/accel/invensense,icm42370p.yaml
new file mode 100644
index 0000000000000..df23406921a51
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/invensense,icm42370p.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/invensense,icm42370p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICM-42370-P Accelerometer
+
+maintainers:
+  - Kanak Shilledar <[email protected]>
+  - Henrik Grimler <[email protected]>
+
+description: |
+  3-axis accelerometer MotionTracking device.
+
+  It supports I3C, I2C and SPI serial communication, has a 2.25kB FIFO
+  and 2 programmable interrupts with low-power wake-on-motion support.
+
+  It also has programmable filters and an embedded temperature sensor.
+
+  https://www.invensense.tdk.com/en-us/products/3-axis/icm-42370-p
+
+properties:
+  compatible:
+    const: invensense,icm42370p
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+    description:
+      Whether irq is in open-drain mode. False means push-pull mode.
+
+  mount-matrix: true
+
+  vdd-supply:
+    description: Regulator operating range between 1.71V to 3.6V.
+
+  vddio-supply:
+    description: Regulator operating range between 1.71V to 3.6V.
+
+dependencies:
+  interrupt-names: [ interrupts ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+  - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@69 {
+            compatible = "invensense,icm42370p";
+            reg = <0x69>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT1";
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 04fa5322d9f74..e4764489ea971 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13561,6 +13561,14 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
 F:	drivers/media/i2c/isl7998x.c
 
+INVENSENSE ICM-42370-P ACCELEROMETER
+M:	Kanak Shilledar <[email protected]>
+M:	Henrik Grimler <[email protected]>
+L:	[email protected]
+S:	Maintained
+W:	https://invensense.tdk.com/
+F:	Documentation/devicetree/bindings/iio/accel/invensense,icm42370p.yaml
+
 INVENSENSE ICM-426xx IMU DRIVER
 M:	Jean-Baptiste Maneyrol <[email protected]>
 L:	[email protected]

-- 
2.43.0