[PATCH v2 32/32] swim: Unexport global symbols

Finn Thain <[email protected]>
Newsgroups org.kernel.vger.linux-m68k,org.kernel.vger.linux-block,org.kernel.vger.linux-kernel
Message-ID <771c797816910eac8e89646dbe35fc0604c64c5b.1786929430.git.fthain@linux-m68k.org> 
These symbols aren't used outside of this file so use local ones.
No functional change.

Reviewed-by: Laurent Vivier <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
---
 drivers/block/swim_asm.S | 218 ++++++++++++++++++++-------------------
 1 file changed, 112 insertions(+), 106 deletions(-)

diff --git a/drivers/block/swim_asm.S b/drivers/block/swim_asm.S
index c78efc30082a..c3f1476948b5 100644
--- a/drivers/block/swim_asm.S
+++ b/drivers/block/swim_asm.S
@@ -14,33 +14,33 @@
  * 2008-11-05 (lv) - add get_swim_mode
  */
 
-	.equ	write_data,	0x0000
-	.equ	write_mark,	0x0200
-	.equ	write_CRC,	0x0400
-	.equ	write_parameter,0x0600
-	.equ	write_phase,	0x0800
-	.equ	write_setup,	0x0a00
-	.equ	write_mode0,	0x0c00
-	.equ	write_mode1,	0x0e00
-	.equ	read_data,	0x1000
-	.equ	read_mark,	0x1200
-	.equ	read_error,	0x1400
-	.equ	read_parameter,	0x1600
-	.equ	read_phase,	0x1800
-	.equ	read_setup,	0x1a00
-	.equ	read_status,	0x1c00
-	.equ	read_handshake,	0x1e00
-
-	.equ	o_side, 0
-	.equ	o_track, 1
-	.equ	o_sector, 2
-	.equ	o_size, 3
-	.equ	o_crc0, 4
-	.equ	o_crc1, 5
-
-	.equ	seek_time, 30000
-	.equ	max_retry, 40
-	.equ	sector_size, 512
+	.equ	.Lwrite_data,		0x0000
+	.equ	.Lwrite_mark,		0x0200
+	.equ	.Lwrite_CRC,		0x0400
+	.equ	.Lwrite_parameter,	0x0600
+	.equ	.Lwrite_phase,		0x0800
+	.equ	.Lwrite_setup,		0x0a00
+	.equ	.Lwrite_mode0,		0x0c00
+	.equ	.Lwrite_mode1,		0x0e00
+	.equ	.Lread_data,		0x1000
+	.equ	.Lread_mark,		0x1200
+	.equ	.Lread_error,		0x1400
+	.equ	.Lread_parameter,	0x1600
+	.equ	.Lread_phase,		0x1800
+	.equ	.Lread_setup,		0x1a00
+	.equ	.Lread_status,		0x1c00
+	.equ	.Lread_handshake,	0x1e00
+
+	.equ	.Lo_side,		0
+	.equ	.Lo_track,		1
+	.equ	.Lo_sector,		2
+	.equ	.Lo_size,		3
+	.equ	.Lo_crc0,		4
+	.equ	.Lo_crc1,		5
+
+	.equ	.Lseek_time,		30000
+	.equ	.Lmax_retry,		40
+	.equ	.Lsector_size,		512
 	.equ	.Lmark_sequence_len,	4
 
 	.equ	.Lmr_clear_fifo,	0x01
@@ -63,7 +63,7 @@
 
 	moveq	#-1, %d1
 	subq	#1, %d4
-	movew	#seek_time, %d2
+	movew	#.Lseek_time, %d2
 
 5:	tstb	%a2@
 	dbmi	%d2, 5b
@@ -88,80 +88,86 @@ swim_read_sector_header:
 	unlk	%a6
 	rts
 
-sector_address_mark:
+.Lsector_address_mark:
 	.byte	0xa1, 0xa1, 0xa1, 0xfe
-sector_data_mark:
+.Lsector_data_mark:
 	.byte	0xa1, 0xa1, 0xa1, 0xfb
 
 .Lmfm_read_header:
 	movel	%a6@(0x08), %a3
-	lea	%a3@(read_handshake), %a2
-	lea	%a3@(read_data), %a5
-	lea	%a3@(read_mark), %a3
+	lea	%a3@(.Lread_handshake), %a2
+	lea	%a3@(.Lread_data), %a5
+	lea	%a3@(.Lread_mark), %a3
 
-	moveb	#.Lmr_write_action, %a3@(write_mode0 - read_mark)
-	moveb	#.Lmr_clear_fifo, %a3@(write_mode1 - read_mark)
-	moveb	#.Lmr_clear_fifo, %a3@(write_mode0 - read_mark)
-	tstb	%a3@(read_error - read_mark)
-	moveb	#.Lmr_action, %a3@(write_mode1 - read_mark)
+	moveb	#.Lmr_write_action, %a3@(.Lwrite_mode0 - .Lread_mark)
+	moveb	#.Lmr_clear_fifo, %a3@(.Lwrite_mode1 - .Lread_mark)
+	moveb	#.Lmr_clear_fifo, %a3@(.Lwrite_mode0 - .Lread_mark)
+	tstb	%a3@(.Lread_error - .Lread_mark)
+	moveb	#.Lmr_action, %a3@(.Lwrite_mode1 - .Lread_mark)
 
-	lea	sector_address_mark, %a1
+	lea	.Lsector_address_mark, %a1
 	moveq	#.Lmark_sequence_len, %d4
 	bsr	.Lmfm_mark_check
 	tstl	%d1
-	bne	signal_nonyb
+	bne	.Lsignal_nonyb
 
 	/* read header */
 
-	moveq	#max_retry, %d2
-amark0:	tstb	%a2@
-	dbmi	%d2, amark0
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lamark0:
+	tstb	%a2@
+	dbmi	%d2, .Lamark0
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_track)
+	moveb	%a5@, %a4@(.Lo_track)
 
-	moveq	#max_retry, %d2
-amark1:	tstb	%a2@
-	dbmi	%d2, amark1
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lamark1:
+	tstb	%a2@
+	dbmi	%d2, .Lamark1
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_side)
+	moveb	%a5@, %a4@(.Lo_side)
 
-	moveq	#max_retry, %d2
-amark2:	tstb	%a2@
-	dbmi	%d2, amark2
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lamark2:
+	tstb	%a2@
+	dbmi	%d2, .Lamark2
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_sector)
+	moveb	%a5@, %a4@(.Lo_sector)
 
-	moveq	#max_retry, %d2
-amark3:	tstb	%a2@
-	dbmi	%d2, amark3
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lamark3:
+	tstb	%a2@
+	dbmi	%d2, .Lamark3
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_size)
+	moveb	%a5@, %a4@(.Lo_size)
 
-	moveq	#max_retry, %d2
-crc0:	tstb	%a2@
-	dbmi	%d2, crc0
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lcrc0:
+	tstb	%a2@
+	dbmi	%d2, .Lcrc0
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_crc0)
+	moveb	%a5@, %a4@(.Lo_crc0)
 
-	moveq	#max_retry, %d2
-crc1:	moveb	%a2@, %d5
-	dbmi	%d2, crc1
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lcrc1:
+	moveb	%a2@, %d5
+	dbmi	%d2, .Lcrc1
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_crc1)
+	moveb	%a5@, %a4@(.Lo_crc1)
 
 	moveb	%a2@, %d5
 	andb	#.Lhr_crc_error, %d5
-	bne	signal_nonyb
+	bne	.Lsignal_nonyb
 
 	moveq	#0, %d0
-signal_nonyb:
-	moveb	#.Lmr_write_action, %a3@(write_mode0 - read_mark)
+.Lsignal_nonyb:
+	moveb	#.Lmr_write_action, %a3@(.Lwrite_mode0 - .Lread_mark)
 	rts
 
 	.global swim_read_sector_data
@@ -170,80 +176,80 @@ swim_read_sector_data:
 	moveml	%d1-%d5/%a0-%a5,%sp@-
 	movel	%a6@(0x0c), %a4
 	moveq	#-1, %d0
-	bsr	mfm_read_data
+	bsr	.Lmfm_read_data
 	moveml	%sp@+, %d1-%d5/%a0-%a5
 	unlk	%a6
 	rts
 
-mfm_read_data:
+.Lmfm_read_data:
 	movel	%a6@(0x08), %a3
-	lea	%a3@(read_handshake), %a2
-	lea	%a3@(read_data), %a5
-	lea	%a3@(read_mark), %a3
+	lea	%a3@(.Lread_handshake), %a2
+	lea	%a3@(.Lread_data), %a5
+	lea	%a3@(.Lread_mark), %a3
 
-	moveb	#.Lmr_write_action, %a3@(write_mode0 - read_mark)
-	moveb	#.Lmr_clear_fifo, %a3@(write_mode1 - read_mark)
-	moveb	#.Lmr_clear_fifo, %a3@(write_mode0 - read_mark)
-	tstb	%a3@(read_error - read_mark)
-	moveb	#.Lmr_action, %a3@(write_mode1 - read_mark)
+	moveb	#.Lmr_write_action, %a3@(.Lwrite_mode0 - .Lread_mark)
+	moveb	#.Lmr_clear_fifo, %a3@(.Lwrite_mode1 - .Lread_mark)
+	moveb	#.Lmr_clear_fifo, %a3@(.Lwrite_mode0 - .Lread_mark)
+	tstb	%a3@(.Lread_error - .Lread_mark)
+	moveb	#.Lmr_action, %a3@(.Lwrite_mode1 - .Lread_mark)
 
-	lea	sector_data_mark, %a1
+	lea	.Lsector_data_mark, %a1
 	moveq	#.Lmark_sequence_len, %d4
 	bsr	.Lmfm_mark_check
 	tstl	%d1
-	bne	data_exit
+	bne	.Ldata_exit
 
 	/* read data */
 
-	movel	#sector_size - 1, %d4		/* sector size */
-	movew	#max_retry, %d2
-read_data_loop:
+	movel	#.Lsector_size - 1, %d4		/* sector size */
+	movew	#.Lmax_retry, %d2
+.Lread_data_loop:
 	moveb	%a2@, %d5
 	andb	#(.Lhr_fifo_1byte + .Lhr_fifo_2bytes), %d5
-	dbne	%d2, read_data_loop
-	beq	data_exit
+	dbne	%d2, .Lread_data_loop
+	beq	.Ldata_exit
 
-	moveq	#max_retry, %d2
+	moveq	#.Lmax_retry, %d2
 	moveb	%a5@, %d3
 	bsr	.Lmaybe_store
 	dbra	%d4, 1f
-	bra	data_crc0
+	bra	.Ldata_crc0
 1:	andb	#.Lhr_fifo_2bytes, %d5
-	beq	read_data_loop
+	beq	.Lread_data_loop
 	moveb	%a5@, %d3
 	bsr	.Lmaybe_store
-	dbra	%d4, read_data_loop
+	dbra	%d4, .Lread_data_loop
 
 	/* read CRC */
 
-	movew	#max_retry, %d2
-data_crc0:
+	movew	#.Lmax_retry, %d2
+.Ldata_crc0:
 	tstb	%a2@
-	dbmi	%d2, data_crc0
-	bpl	data_exit
+	dbmi	%d2, .Ldata_crc0
+	bpl	.Ldata_exit
 
 	moveb	%a5@, %d2
 
-	moveq	#max_retry, %d2
-data_crc1:
+	moveq	#.Lmax_retry, %d2
+.Ldata_crc1:
 	moveb	%a2@, %d5
-	dbmi	%d2, data_crc1
-	bpl	data_exit
+	dbmi	%d2, .Ldata_crc1
+	bpl	.Ldata_exit
 
 	moveb	%a5@, %d2
 
 	moveb	%a2@, %d5
 	andb	#.Lhr_crc_error, %d5
-	bne	data_exit
+	bne	.Ldata_exit
 
 	/* return number of bytes read */
 
-	movel	#sector_size, %d0
+	movel	#.Lsector_size, %d0
 	addw	#1, %d4
 	subl	%d4, %d0
 
-data_exit:
-	moveb	#.Lmr_write_action, %a3@(write_mode0 - read_mark)
+.Ldata_exit:
+	moveb	#.Lmr_write_action, %a3@(.Lwrite_mode0 - .Lread_mark)
 	rts
 
 .Lmaybe_store:
-- 
2.52.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.