[PATCH] ARM: OMAP2+: Make OMAP4 finish_suspend callback CFI-safe

With CONFIG_CFI enabled, OMAP4 can trap in omap4_enter_lowpower()
because omap_pm_ops.finish_suspend points directly to the assembly
routine omap4_finish_suspend, which lacks the expected KCFI type
metadata.

Add a small C wrapper with the exact callback prototype and use it for
finish_suspend.

Signed-off-by: Mithil Bavishi <[email protected]>
---
 arch/arm/mach-omap2/omap-mpuss-lowpower.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index f18ef45e2..1c51b2f97 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -111,6 +111,11 @@ static struct cpu_pm_ops omap_pm_ops = {
 	.hotplug_restart	= dummy_cpu_resume,
 };
 
+static int omap4_finish_suspend_wrapper(unsigned long cpu_state)
+{
+	return omap4_finish_suspend(cpu_state);
+}
+
 /*
  * Program the wakeup routine address for the CPU0 and CPU1
  * used for OFF or DORMANT wakeup.
@@ -437,7 +442,7 @@ int __init omap4_mpuss_init(void)
 	}
 
 	if (cpu_is_omap44xx()) {
-		omap_pm_ops.finish_suspend = omap4_finish_suspend;
+		omap_pm_ops.finish_suspend = omap4_finish_suspend_wrapper;
 		omap_pm_ops.resume = omap4_cpu_resume;
 		omap_pm_ops.scu_prepare = scu_pwrst_prepare;
 		omap_pm_ops.hotplug_restart = omap4_secondary_startup;
-- 
2.43.0