[PATCH] PCI: j721e: Fix incorrect max_lanes for J7200

The PCIe Controller in the J7200 SoC supports a 4-lane configuration.
However, j7200_pcie_rc_data and j7200_pcie_ep_data incorrectly set
.max_lanes = 2, limiting operation to fewer lanes than the hardware
supports.

Set .max_lanes = 4 for both j7200_pcie_rc_data and j7200_pcie_ep_data to
match the hardware capability.

See J7200 Technical Reference Manual (SPRUIU1D), section 12.2.3.1.1
for further details: https://www.ti.com/lit/pdf/spruiu1d

Fixes: 3ac7f14084f5 ("PCI: j721e: Add per platform maximum lane settings")
Signed-off-by: Takuma Fujiwara <[email protected]>
---
 drivers/pci/controller/cadence/pci-j721e.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index b29a35fbfb5f9..a029c4e9c05f6 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -381,7 +381,7 @@ static const struct j721e_pcie_data j7200_pcie_rc_data = {
 	.quirk_detect_quiet_flag = true,
 	.linkdown_irq_regfield = J7200_LINK_DOWN,
 	.byte_access_allowed = true,
-	.max_lanes = 2,
+	.max_lanes = 4,
 };
 
 static const struct j721e_pcie_data j7200_pcie_ep_data = {
@@ -389,7 +389,7 @@ static const struct j721e_pcie_data j7200_pcie_ep_data = {
 	.quirk_detect_quiet_flag = true,
 	.linkdown_irq_regfield = J7200_LINK_DOWN,
 	.quirk_disable_flr = true,
-	.max_lanes = 2,
+	.max_lanes = 4,
 };
 
 static const struct j721e_pcie_data am64_pcie_rc_data = {
-- 
2.34.1