Re: [hwmon-next PATCH v5 1/4] dt-bindings: hwmon: add adi,adt7470

On Thu, Jul 30, 2026 at 06:29:56PM -0300, Luiz Angelo Daros de Luca wrote:
> The Analog Devices ADT7470 is a multichannel temperature sensor and
> PWM fan controller. It supports monitoring up to 10 external
> temperature sensors and controlling up to 4 fans.
> 
> Add the device tree binding documentation for it. This includes
> support for the thermal framework by defining the "#thermal-sensor-cells"
> property, and models the fan control lines as PWM channels by
> defining the "#pwm-cells" property.
> 
> Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
> ---
>  .../devicetree/bindings/hwmon/adi,adt7470.yaml     | 58 ++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adt7470.yaml b/Documentation/devicetree/bindings/hwmon/adi,adt7470.yaml
> new file mode 100644
> index 000000000000..f653a06f241a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adt7470.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/adi,adt7470.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADT7470 hwmon sensor
> +
> +maintainers:
> +  - Luiz Angelo Daros de Luca <[email protected]>
> +
> +description:
> +  Multi-channel temperature monitor and PWM fan controller.
> +  It supports monitoring up to 10 external temperature sensors and
> +  controlling up to 4 fans. The fan control lines are modeled
> +  as standard PWM channels.
> +
> +allOf:
> +  - if:
> +      required:
> +        - "#thermal-sensor-cells"
> +    then:
> +      $ref: /schemas/thermal/thermal-sensor.yaml#

Place the entire "allOf:" after "required:" block.


Reviewed-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof