SMP causing APIC errors

Phil White <[email protected]> Thu, 22 Apr 2004 13:13:03 -0700
Newsgroups org.kernel.vger.linux-smp
Message-ID <[email protected]> 
The board in question here is an itox with P-3 800s in it.

I posted a similar problem here before and the solution was
to turn off high memory support.  I'd prefer high memory on
as I'd like the use of my top 100M or so of RAM, but as it
turns out, high memory doesn't seem to have an effect either 
way.

I'm able to run it with nosmp (with high memory and without).
Without nosmp, I get a flurry of APIC errors and the system
is very unstable (often requiring me to boot with init=/bin/sh).

I've tried a couple of 2.6.4 kernels.  One with high mem, one
without.  The dmesg logs with "safe" in the name refers to an
extended command line I tried (nolapic noapic acpi=force pci=noacpi
noirqbalance acpi_irq_nobalance).  I have 4 dmesg logs attached:

dmesg-hi-2.6.4 = 2.6.4 with high memory support.  No command line args.
dmesg-hi-safe-2.6.4 = 2.6.4 with high memory support.  The aforementioned
                      command line.
dmesg-nohi-2.6.4 = 2.6.4 without high memory support.  No command line args.
dmesg-nohi-safe-2.6.4 = 2.6.4 without high memory support.  The aforementioned
                      command line.

Another thing that's odd, but has no effect either way is that the
BIOS's MPS is set to 1.4, but in dmesg, it's set to 1.1.  I've tried
booting with both settings in the BIOS without any luck.

Any ideas on what to try?

-Phil/CERisE
dmesg-hi-2.6.4 (text/plain, 10.4 KB) 
Linux version 2.6.4 (root@littlegreenmen) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #14 SMP Sun Apr 11 23:52:38 PDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
ACPI: S3 and PAE do not like each other for now, S3 disabled.
found SMP MP-table at 000f55b0
On node 0 totalpages: 262128
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 32752 pages, LIFO batch:7
DMI 2.2 present.
ACPI disabled because your bios is from 00 and too old
You can enable it with acpi=force
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 6:8 APIC version 17
Processor #1 6:8 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 2
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6.4.D ro root=2141 init=/bin/sh
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 802.053 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 1032776k/1048512k available (2190k kernel code, 14832k reserved, 731k data, 176k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1585.15 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Coppermine) stepping 03
per-CPU timeslice cutoff: 731.23 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1601.53 BogoMIPS
CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 03
Total of 2 processors activated (3186.68 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 001 01  0    0    0   0   0    1    1    51
 07 001 01  0    0    0   0   0    1    1    59
 08 001 01  0    0    0   0   0    1    1    61
 09 000 00  1    0    0   0   0    0    0    00
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 001 01  0    0    0   0   0    1    1    69
 0d 001 01  0    0    0   0   0    1    1    71
 0e 001 01  0    0    0   0   0    1    1    79
 0f 001 01  0    0    0   0   0    1    1    81
 10 001 01  1    1    0   1   0    1    1    89
 11 001 01  1    1    0   1   0    1    1    91
 12 001 01  1    1    0   1   0    1    1    99
 13 001 01  1    1    0   1   0    1    1    A1
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 801.0723 MHz.
..... host bus clock speed is 100.0215 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
APIC error on CPU1: 00(02)
APIC error on CPU0: 00(04)
APIC error on CPU1: 02(08)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb330, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
APIC error on CPU0: 04(04)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(0a)
APIC error on CPU0: 04(05)
ACPI: Subsystem revision 20040220
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf90
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfb8, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI->APIC IRQ transform: (B0,I7,P3) -> 161
PCI->APIC IRQ transform: (B0,I9,P0) -> 137
PCI->APIC IRQ transform: (B0,I11,P0) -> 145
PCI->APIC IRQ transform: (B0,I13,P0) -> 153
PCI->APIC IRQ transform: (B1,I0,P0) -> 137
Starting balanced_irq
Total HugeTLB memory allocated, 0
ikconfig 0.7 with /proc/config*
highmem bounce pool size: 64 pages
APIC error on CPU0: 05(01)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(0a)
APIC error on CPU0: 01(05)
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
SGI XFS with ACLs, realtime, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hdb: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PDC20269: IDE controller at PCI slot 0000:00:09.0
PDC20269: chipset revision 2
PDC20269: 100% native mode on irq 137
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
hdf: IC35L120AVV207-1, ATA DISK drive
ide2 at 0xc400-0xc407,0xc802 on irq 137
hdg: IC35L120AVV207-1, ATA DISK drive
ide3 at 0xcc00-0xcc07,0xd002 on irq 137
hdf: max request size: 1024KiB
hdf: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host2/bus0/target1/lun0: p1
hdg: max request size: 1024KiB
hdg: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host2/bus1/target0/lun0: unknown partition table
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
APIC error on CPU0: 05(04)
APIC error on CPU1: 0a(08)
APIC error on CPU1: 08(02)
APIC error on CPU0: 04(04)
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
APIC error on CPU0: 04(04)
APIC error on CPU1: 02(08)
APIC error on CPU1: 08(0a)
APIC error on CPU0: 04(05)
APIC error on CPU0: 05(04)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(0a)
APIC error on CPU0: 04(05)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
Software Suspend has malfunctioning SMP support. Disabled :(
PM: Reading pmdisk image.
PM: Resume from disk failed.
APIC error on CPU1: 0a(08)
XFS mounting filesystem hdf1
APIC error on CPU1: 08(08)
Ending clean XFS mount for filesystem: hdf1
VFS: Mounted root (xfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 176k freed
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(02)
APIC error on CPU0: 05(01)
APIC error on CPU1: 02(02)
APIC error on CPU0: 01(01)
APIC error on CPU1: 02(02)
APIC error on CPU0: 01(01)
APIC error on CPU1: 02(08)
APIC error on CPU1: 08(02)
APIC error on CPU0: 01(04)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(01)
APIC error on CPU1: 02(02)
unexpected IRQ trap at vector 88
APIC error on CPU0: 01(01)
APIC error on CPU1: 02(02)
unexpected IRQ trap at vector 88
APIC error on CPU0: 01(04)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(04)
unexpected IRQ trap at vector 88
APIC error on CPU1: 02(08)
APIC error on CPU1: 08(02)
dmesg-hi-safe-2.6.4 (text/plain, 9.6 KB) 
Linux version 2.6.4 (root@littlegreenmen) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #14 SMP Sun Apr 11 23:52:38 PDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
ACPI: S3 and PAE do not like each other for now, S3 disabled.
found SMP MP-table at 000f55b0
On node 0 totalpages: 262128
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 32752 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 AWARD                                     ) @ 0x000f6de0
ACPI: RSDT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 AWARD           0x00000000  0x00000000) @ 0x3fff5180
ACPI: DSDT (v001 AWARD  AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 2
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6.4.D-safe ro root=2141 nolapic noapic acpi=force pci=noacpi noirqbalance acpi_irq_nobalance init=/bin/sh
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 801.918 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 1032776k/1048512k available (2190k kernel code, 14832k reserved, 731k data, 176k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1585.15 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Coppermine) stepping 03
per-CPU timeslice cutoff: 732.15 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
APIC error on CPU0: 00(01)
APIC error on CPU0: 01(04)
APIC error on CPU0: 04(04)
APIC error on CPU0: 04(04)
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1597.44 BogoMIPS
CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 03
Total of 2 processors activated (3182.59 BogoMIPS).
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 801.0665 MHz.
..... host bus clock speed is 100.0208 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb330, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
APIC error on CPU1: 00(02)
APIC error on CPU0: 00(04)
APIC error on CPU0: 04(05)
APIC error on CPU1: 02(0a)
ACPI: Subsystem revision 20040220
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf90
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfb8, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
APIC error on CPU0: 05(04)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(05)
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
vesafb: framebuffer at 0xd2000000, mapped to 0xf8806000, size 4096k
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: protected mode interface info at c000:0336
vesafb: scrolling: redraw
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
fb0: VESA VGA frame buffer device
Total HugeTLB memory allocated, 0
APIC error on CPU0: 05(04)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(0a)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(0a)
APIC error on CPU0: 04(05)
ikconfig 0.7 with /proc/config*
highmem bounce pool size: 64 pages
APIC error on CPU0: 05(01)
APIC error on CPU1: 0a(0a)
APIC error on CPU0: 01(04)
APIC error on CPU0: 04(01)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(0a)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(0a)
APIC error on CPU1: 0a(08)
APIC error on CPU0: 01(05)
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
SGI XFS with ACLs, realtime, no debug enabled
APIC error on CPU0: 05(04)
APIC error on CPU0: 04(04)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 04(04)
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 128x48
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hdb: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PDC20269: IDE controller at PCI slot 0000:00:09.0
PCI: Found IRQ 11 for device 0000:00:09.0
PDC20269: chipset revision 2
PDC20269: 100% native mode on irq 11
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
hdf: IC35L120AVV207-1, ATA DISK drive
ide2 at 0xc400-0xc407,0xc802 on irq 11
hdg: IC35L120AVV207-1, ATA DISK drive
ide3 at 0xcc00-0xcc07,0xd002 on irq 11
hdf: max request size: 1024KiB
hdf: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host2/bus0/target1/lun0: p1
hdg: max request size: 1024KiB
hdg: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host2/bus1/target0/lun0: unknown partition table
Console: switching to colour frame buffer device 128x48
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
APIC error on CPU0: 04(04)
APIC error on CPU1: 08(02)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(01)
APIC error on CPU0: 01(04)
APIC error on CPU1: 02(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 04(04)
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
APIC error on CPU1: 08(02)
APIC error on CPU0: 04(04)
APIC error on CPU0: 04(05)
APIC error on CPU1: 02(02)
APIC error on CPU0: 05(04)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(08)
APIC error on CPU0: 04(44)
APIC error on CPU0: 44(04)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(0a)
APIC error on CPU0: 04(05)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
Software Suspend has malfunctioning SMP support. Disabled :(
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S4bios S5)
XFS mounting filesystem hdf1
Starting XFS recovery on filesystem: hdf1 (dev: hdf1)
Ending XFS recovery on filesystem: hdf1 (dev: hdf1)
VFS: Mounted root (xfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 176k freed
APIC error on CPU1: 0a(02)
APIC error on CPU0: 05(01)
unexpected IRQ trap at vector 88
dmesg-nohi-2.6.4 (text/plain, 9.2 KB) 
Linux version 2.6.4 (root@littlegreenmen) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #16 SMP Wed Apr 21 13:09:48 PDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000f55b0
On node 0 totalpages: 229376
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI disabled because your bios is from 00 and too old
You can enable it with acpi=force
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 6:8 APIC version 17
Processor #1 6:8 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 2
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6.4 ro root=2141 init=/bin/sh
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 801.995 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 904380k/917504k available (2115k kernel code, 12380k reserved, 712k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1585.15 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Coppermine) stepping 03
per-CPU timeslice cutoff: 732.15 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1601.53 BogoMIPS
CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 03
Total of 2 processors activated (3186.68 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 001 01  0    0    0   0   0    1    1    51
 07 001 01  0    0    0   0   0    1    1    59
 08 001 01  0    0    0   0   0    1    1    61
 09 000 00  1    0    0   0   0    0    0    00
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 001 01  0    0    0   0   0    1    1    69
 0d 001 01  0    0    0   0   0    1    1    71
 0e 001 01  0    0    0   0   0    1    1    79
 0f 001 01  0    0    0   0   0    1    1    81
 10 001 01  1    1    0   1   0    1    1    89
 11 001 01  1    1    0   1   0    1    1    91
 12 001 01  1    1    0   1   0    1    1    99
 13 001 01  1    1    0   1   0    1    1    A1
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 801.0736 MHz.
..... host bus clock speed is 100.0216 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb330, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
APIC error on CPU0: 00(04)
APIC error on CPU1: 00(02)
APIC error on CPU1: 02(0a)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(08)
APIC error on CPU0: 04(05)
ACPI: Subsystem revision 20040220
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf90
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfb8, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I9,P0) -> 16
PCI->APIC IRQ transform: (B0,I11,P0) -> 17
PCI->APIC IRQ transform: (B0,I13,P0) -> 18
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Total HugeTLB memory allocated, 0
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
SGI XFS with ACLs, realtime, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hdb: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PDC20269: IDE controller at PCI slot 0000:00:09.0
PDC20269: chipset revision 2
PDC20269: 100% native mode on irq 16
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
hdf: IC35L120AVV207-1, ATA DISK drive
ide2 at 0xc400-0xc407,0xc802 on irq 16
hdg: IC35L120AVV207-1, ATA DISK drive
ide3 at 0xcc00-0xcc07,0xd002 on irq 16
hdf: max request size: 1024KiB
hdf: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host2/bus0/target1/lun0: p1
hdg: max request size: 1024KiB
hdg: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host2/bus1/target0/lun0: unknown partition table
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Software Suspend has malfunctioning SMP support. Disabled :(
XFS mounting filesystem hdf1
Ending clean XFS mount for filesystem: hdf1
VFS: Mounted root (xfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 172k freed
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(02)
APIC error on CPU0: 05(01)
NET: Registered protocol family 1
dmesg-nohi-safe-2.6.4 (text/plain, 9.5 KB) 
Linux version 2.6.4 (root@littlegreenmen) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #16 SMP Wed Apr 21 13:09:48 PDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000f55b0
On node 0 totalpages: 229376
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 AWARD                                     ) @ 0x000f6de0
ACPI: RSDT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 AWARD           0x00000000  0x00000000) @ 0x3fff5180
ACPI: DSDT (v001 AWARD  AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 2
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6.4-safe ro root=2141 nolapic noapic acpi=force pci=noacpi noirqbalance acpi_irq_nobalance init=/bin/sh
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 802.005 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 904380k/917504k available (2115k kernel code, 12380k reserved, 712k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1585.15 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Coppermine) stepping 03
per-CPU timeslice cutoff: 731.23 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1601.53 BogoMIPS
CPU:     After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 03
Total of 2 processors activated (3186.68 BogoMIPS).
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 801.0709 MHz.
..... host bus clock speed is 100.0213 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
APIC error on CPU0: 00(04)
APIC error on CPU1: 00(08)
APIC error on CPU1: 08(0a)
APIC error on CPU0: 04(05)
APIC error on CPU0: 05(04)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(45)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb330, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20040220
APIC error on CPU0: 45(04)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(05)
APIC error on CPU1: 02(08)
APIC error on CPU0: 05(04)
APIC error on CPU0: 04(05)
APIC error on CPU1: 08(02)
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf90
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfb8, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
APIC error on CPU0: 05(04)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(0a)
APIC error on CPU0: 04(05)
Total HugeTLB memory allocated, 0
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch ([email protected])
APIC error on CPU0: 05(04)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(08)
APIC error on CPU0: 04(05)
devfs: boot_options: 0x1
SGI XFS with ACLs, realtime, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hdb: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PDC20269: IDE controller at PCI slot 0000:00:09.0
PCI: Found IRQ 11 for device 0000:00:09.0
PDC20269: chipset revision 2
PDC20269: 100% native mode on irq 11
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
hdf: IC35L120AVV207-1, ATA DISK drive
ide2 at 0xc400-0xc407,0xc802 on irq 11
hdg: IC35L120AVV207-1, ATA DISK drive
ide3 at 0xcc00-0xcc07,0xd002 on irq 11
hdf: max request size: 1024KiB
hdf: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host2/bus0/target1/lun0: p1
APIC error on CPU0: 05(04)
APIC error on CPU1: 08(02)
APIC error on CPU1: 02(0a)
APIC error on CPU0: 04(05)
hdg: max request size: 1024KiB
hdg: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host2/bus1/target0/lun0: unknown partition table
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
APIC error on CPU0: 05(04)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(08)
APIC error on CPU0: 04(05)
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
APIC error on CPU0: 05(04)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(0a)
APIC error on CPU1: 0a(02)
APIC error on CPU0: 04(05)
APIC error on CPU0: 05(04)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(05)
TCP: Hash tables configured (established 262144 bind 65536)
Software Suspend has malfunctioning SMP support. Disabled :(
ACPI: (supports S0 S1 S4bios S5)
XFS mounting filesystem hdf1
Ending clean XFS mount for filesystem: hdf1
VFS: Mounted root (xfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 172k freed
NET: Registered protocol family 1
APIC error on CPU0: 05(04)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(0a)
APIC error on CPU0: 04(05)
APIC error on CPU0: 05(01)
APIC error on CPU1: 0a(02)
APIC error on CPU1: 02(02)
APIC error on CPU0: 01(05)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(02)
APIC error on CPU0: 05(04)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(04)
APIC error on CPU1: 02(02)
unexpected IRQ trap at vector 88
unexpected IRQ trap at vector 88
APIC error on CPU0: 04(04)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(02)
APIC error on CPU1: 02(02)
unexpected IRQ trap at vector 88
APIC error on CPU0: 04(04)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(01)
unexpected IRQ trap at vector 88
APIC error on CPU1: 02(02)
APIC error on CPU0: 01(04)
APIC error on CPU1: 02(02)
APIC error on CPU0: 04(05)
APIC error on CPU1: 02(02)