[PATCH v2 09/14] arm64: dts: qcom: ipq5018: Add clocks required for USB3 support
George Moussalem via B4 Relay <[email protected]>
| Newsgroups | org.kernel.vger.linux-usb,org.infradead.lists.linux-phy,org.kernel.feeds.b4-sent,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: George Moussalem <[email protected]> Add aux and lfps clocks to USB controller node for Super-Speed support. These clocks are required for USB3 mode only and are not needed for USB2 mode. Signed-off-by: George Moussalem <[email protected]> --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 965649db36f3..c98889a7c26c 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -604,11 +604,21 @@ usb: usb@8a00000 { clocks = <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, <&gcc GCC_USB0_SLEEP_CLK>, - <&gcc GCC_USB0_MOCK_UTMI_CLK>; + <&gcc GCC_USB0_MOCK_UTMI_CLK>, + <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_LFPS_CLK>; clock-names = "core", "iface", "sleep", - "mock_utmi"; + "mock_utmi", + "aux", + "lfps"; + assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <200000000>, + <200000000>, + <60000000>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, -- 2.53.0