[PATCH v2 11/14] arm64: dts: qcom: ipq5018: Add Super-Speed UNIPHY to USB node
George Moussalem via B4 Relay <[email protected]>
| Newsgroups | org.kernel.vger.linux-usb,org.infradead.lists.linux-phy,org.kernel.feeds.b4-sent,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: George Moussalem <[email protected]> Add the USB3 UNIPHY node to the USB controller node. In addition, switch to the pipe clock supplied by the USB3 UNIPHY instead of the UTMI clock. Signed-off-by: George Moussalem <[email protected]> --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index c98889a7c26c..01b8181ffa40 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -631,10 +631,8 @@ usb: usb@8a00000 { resets = <&gcc GCC_USB0_BCR>; - phys = <&usbphy0>; - phy-names = "usb2-phy"; - - qcom,select-utmi-as-pipe-clk; + phys = <&usbphy0>, <&usbphy1>; + phy-names = "usb2-phy", "usb3-phy"; tx-fifo-resize; snps,is-utmi-l1-suspend; -- 2.53.0