[net-next,PATCH v2 0/5] Some improve for STM32MP2X

Add PHY Regu for MP23/MP25-DK
Increase deassert value for PHY Reset for MP25-EV1
Add support of phy-supply regulator
Remove commit "net: stmmac: manage error case during stmmac_dvr_probe" 
from my series to push in net-next networking tree

v2: Add reviewed-by from Linus
    Add missing commit to manage phy-supply property 
    (yaml and glue support)


Christophe Roullier (5):
  dt-bindings: net: add phy-supply property for stm32
  net: ethernet: stmmac: stm32: support the phy-supply regulator binding
  arm64: dts: st: add 3v3 regulator to ethernet on stm32mp235f-dk
  arm64: dts: st: add 3v3 regulator to ethernet on stm32mp257f-dk
  arm64: dts: st: increase deassert of PHY reset in stm32mp257f-ev1

 .../devicetree/bindings/net/stm32-dwmac.yaml  |  3 ++
 arch/arm64/boot/dts/st/stm32mp235f-dk.dts     |  1 +
 arch/arm64/boot/dts/st/stm32mp257f-dk.dts     |  1 +
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts    |  2 +-
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 51 ++++++++++++++++++-
 5 files changed, 56 insertions(+), 2 deletions(-)

-- 
2.43.0