[net-next,PATCH v2 3/5] arm64: dts: st: add 3v3 regulator to ethernet on stm32mp235f-dk

Christophe Roullier <[email protected]>
Newsgroups org.kernel.vger.netdev,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]> 
The Ethernet PHY is supplied by 3v3 PMIC regulator, add it to Ethernet
node.

Signed-off-by: Christophe Roullier <[email protected]>
---
 arch/arm64/boot/dts/st/stm32mp235f-dk.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp235f-dk.dts b/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
index dd4efbe5a46e8..fb49cd2da2c69 100644
--- a/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
+++ b/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
@@ -137,6 +137,7 @@ &ethernet1 {
 	pinctrl-names = "default", "sleep";
 	phy-handle = <&phy1_eth1>;
 	phy-mode = "rgmii-id";
+	phy-supply = <&scmi_v3v3>;
 	status = "okay";
 
 	mdio {
-- 
2.43.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.