[PATCH 0/2] Add gpio configuration support for Qualcomm Snapdragon platform

Petr Hodina via B4 Relay <[email protected]> Mon, 01 Jun 2026 13:52:34 +0200

Newsgroups	org.kernel.vger.phone-devel,org.kernel.feeds.b4-sent,org.u-boot-project.lists.u-boot
Message-ID	<[email protected]>

This patch series adds the gpio configuration as input along with
pull-up/down/disable and drive strength for output.

Remove the reconfiguration from the set_direction.

This enables on mainline Linux phones to use volume-up in menu.

Signed-off-by: Petr Hodina <[email protected]>
---
Petr Hodina (2):
      gpio: qcom_pmic_gpio: implement standard pinconf parameters
      gpio: qcom_pmic_gpio: don't reset pull on direction change

 drivers/gpio/qcom_pmic_gpio.c | 41 ++++++++++++++++++++++++++++++++---------
 1 file changed, 32 insertions(+), 9 deletions(-)
---
base-commit: 1f89ddd61cd8c27a3dc1fc7edbeccb55d424eb72
change-id: 20260601-qcom-gpio-98e85ab22647

Best regards,
--  
Petr Hodina <[email protected]>