Re: [PATCH v2 3/3] phy: qcom: qmp-combo: Add SM8475 support

Dmitry Baryshkov <[email protected]> Wed, 22 Jul 2026 01:47:34 +0300

Newsgroups	org.kernel.vger.phone-devel,org.infradead.lists.linux-phy,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID	<j2oyolcgxtka734fn6fmv2fk7em6zkmrvkivihtldbbllmy4co@eh742ign7i6q>

On Wed, Jul 15, 2026 at 03:06:56AM -0400, Esteban Urrutia via B4 Relay wrote:
> From: Esteban Urrutia <[email protected]>
> 
> Has been tested with the following capabilities:
> - USB Type-C at 10Gb/s
> - DP Alt Mode, using HBR2
> - USB Type-C at 480Mb/s + DP Alt Mode, using HBR2
> 
> RX and PCS USB tables had to be added, while serdes, TX and PCS tables were
> reused from other SoCs.
> Since SM8475 uses a v1 PLL, add and use v1 PLL tables as well.
> 
> Signed-off-by: Esteban Urrutia <[email protected]>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 169 ++++++++++++++++++++++++++++++
>  1 file changed, 169 insertions(+)

With the v1 mentions being removed, LGTM.

-- 
With best wishes
Dmitry