Re: [PATCH v4 2/2] arm64: dts: qcom: sdm845-google: Enable PMI8998 camera flash LEDs
Dmitry Baryshkov <[email protected]> Wed, 22 Jul 2026 16:45:23 +0300
| Newsgroups | org.kernel.vger.phone-devel,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <bmoq52hoycfks65xplep6ggavilr2xmz74njgfn4wyufl6vlhe@5l7rcyyb2qgn> |
On Sun, Jul 19, 2026 at 07:02:00PM +0200, David Heidelberg via B4 Relay wrote: > From: David Heidelberg <[email protected]> > > Enable the PMI8998 flash LED block and describe two white flash LEDs > used for the rear camera. > > Configure the LED in flash mode with hardware limits matching the > original device configuration, including maximum current and timeout. > > In contrary to downstream, we can control both LEDs separately. > > Signed-off-by: David Heidelberg <[email protected]> > --- > arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 25 ++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > Reviewed-by: Dmitry Baryshkov <[email protected]> -- With best wishes Dmitry