[PATCH 21/26] hw/riscv: pfsoc: Fix Icicle Kit RAM size at 2 GiB

The Icicle Kit has 2 GiB of RAM, and its firmware device tree
describes that fixed capacity. The model currently defaults to
1537 MiB and accepts any larger size, allowing configurations
that do not match the board.

Set the default to 2 GiB and reject every other size. Update the
documentation and L2CC qtest command line accordingly.

Signed-off-by: Bin Meng <[email protected]>
---

 docs/system/riscv/microchip-icicle-kit.rst |  4 +---
 hw/riscv/microchip_pfsoc.c                 | 15 ++++-----------
 2 files changed, 5 insertions(+), 14 deletions(-)

diff --git a/docs/system/riscv/microchip-icicle-kit.rst b/docs/system/riscv/microchip-icicle-kit.rst
index 9809e94b84..3db2b3c7e3 100644
--- a/docs/system/riscv/microchip-icicle-kit.rst
+++ b/docs/system/riscv/microchip-icicle-kit.rst
@@ -26,9 +26,7 @@ The ``microchip-icicle-kit`` machine supports the following devices:
 * 2 GEM Ethernet controllers
 * 1 SDHC storage controller
 
-The memory is set to 1537 MiB by default.  A sanity check on RAM size is
-performed in the machine init routine to prompt user to increase the RAM size
-to > 1537 MiB when less than 1537 MiB RAM is detected.
+The machine has a fixed 2 GiB of RAM. Other memory sizes are rejected.
 
 Boot options
 ------------
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index a2fbc89222..b604f7008b 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -557,10 +557,10 @@ static void microchip_icicle_kit_machine_init(MachineState *machine)
     DriveInfo *dinfo = drive_get(IF_SD, 0, 0);
     RISCVBootInfo boot_info;
 
-    /* Sanity check on RAM size */
-    if (machine->ram_size < mc->default_ram_size) {
+    /* The board has a fixed RAM size */
+    if (machine->ram_size != mc->default_ram_size) {
         char *sz = size_to_str(mc->default_ram_size);
-        error_report("Invalid RAM size, should be bigger than %s", sz);
+        error_report("Invalid RAM size, should be %s", sz);
         g_free(sz);
         exit(EXIT_FAILURE);
     }
@@ -770,14 +770,7 @@ static void microchip_icicle_kit_machine_class_init(ObjectClass *oc,
     mc->default_ram_id = "microchip.icicle.kit.ram";
     mc->auto_create_sdcard = true;
 
-    /*
-     * Map 513 MiB high memory, the minimum required high memory size, because
-     * HSS will do memory test against the high memory address range regardless
-     * of physical memory installed.
-     *
-     * See memory_tests() in mss_ddr.c in the HSS source code.
-     */
-    mc->default_ram_size = 1537 * MiB;
+    mc->default_ram_size = 2 * GiB;
 
     object_class_property_add(oc, "clint-timebase-frequency", "uint32_t",
                               microchip_icicle_kit_get_clint_timebase_freq,
-- 
2.34.1