[PATCH 02/26] hw/riscv: pfsoc: Map the L2 zero device window

HSS uses a window at 0x0a000000 while setting up the L2 cache,
decompressing its runtime image, and executing that image.
The missing mapping causes the E51 to trap before firmware can
initialize its UART.

Represent the window with RAM to provide its persistent read,
write, and execute effects without claiming to model the L2
cache itself.

Signed-off-by: Bin Meng <[email protected]>
---

 include/hw/riscv/microchip_pfsoc.h |  1 +
 hw/riscv/microchip_pfsoc.c         | 13 +++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/include/hw/riscv/microchip_pfsoc.h b/include/hw/riscv/microchip_pfsoc.h
index a30b944afa..612fd2b69c 100644
--- a/include/hw/riscv/microchip_pfsoc.h
+++ b/include/hw/riscv/microchip_pfsoc.h
@@ -90,6 +90,7 @@ enum {
     MICROCHIP_PFSOC_L2CC,
     MICROCHIP_PFSOC_DMA,
     MICROCHIP_PFSOC_L2LIM,
+    MICROCHIP_PFSOC_L2ZERO,
     MICROCHIP_PFSOC_PLIC,
     MICROCHIP_PFSOC_MMUART0,
     MICROCHIP_PFSOC_WDOG0,
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index 218cccab69..fd28ee75fe 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -97,6 +97,7 @@ static const MemMapEntry microchip_pfsoc_memmap[] = {
     [MICROCHIP_PFSOC_L2CC] =            {  0x2010000,       0x1000 },
     [MICROCHIP_PFSOC_DMA] =             {  0x3000000,     0x100000 },
     [MICROCHIP_PFSOC_L2LIM] =           {  0x8000000,     0x200000 },
+    [MICROCHIP_PFSOC_L2ZERO] =          {  0xa000000,     0x200000 },
     [MICROCHIP_PFSOC_PLIC] =            {  0xc000000,    0x4000000 },
     [MICROCHIP_PFSOC_MMUART0] =         { 0x20000000,       0x1000 },
     [MICROCHIP_PFSOC_WDOG0] =           { 0x20001000,       0x1000 },
@@ -201,6 +202,7 @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp)
     MemoryRegion *rsvd0_mem = g_new(MemoryRegion, 1);
     MemoryRegion *e51_dtim_mem = g_new(MemoryRegion, 1);
     MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1);
+    MemoryRegion *l2zero_mem = g_new(MemoryRegion, 1);
     MemoryRegion *envm_data = g_new(MemoryRegion, 1);
     MemoryRegion *qspi_xip_mem = g_new(MemoryRegion, 1);
     char *plic_hart_config;
@@ -277,6 +279,17 @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp)
                                 memmap[MICROCHIP_PFSOC_L2LIM].base,
                                 l2lim_mem);
 
+    /*
+     * HSS decompresses into the L2 zero-device window and executes there.
+     * Model it as RAM because QEMU does not model the backing L2 cache.
+     */
+    memory_region_init_ram(l2zero_mem, NULL, "microchip.pfsoc.l2zero",
+                           memmap[MICROCHIP_PFSOC_L2ZERO].size,
+                           &error_fatal);
+    memory_region_add_subregion(system_memory,
+                                memmap[MICROCHIP_PFSOC_L2ZERO].base,
+                                l2zero_mem);
+
     /* create PLIC hart topology configuration string */
     plic_hart_config = riscv_plic_hart_config_string(ms->smp.cpus);
 
-- 
2.34.1