[PATCH 24/26] docs/system/riscv: pfsoc: Document CLINT topology for direct Linux boot

The generic OpenSBI platform derives the CLINT first hart and register
slot count from interrupts-extended.  Some S-mode-only MPFS device trees
mask the E51 M-mode interrupt entries with 0xffffffff, which shifts the
MSIP and MTIMECMP slots when the same DTB is used for direct boot.

Document the complete five-hart CLINT node. Require interrupts 3 and 7
for hart 0 as well as the U54 harts.

Signed-off-by: Bin Meng <[email protected]>
---

 docs/system/riscv/microchip-icicle-kit.rst | 23 +++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/docs/system/riscv/microchip-icicle-kit.rst b/docs/system/riscv/microchip-icicle-kit.rst
index eeb4ff938c..af8e984df7 100644
--- a/docs/system/riscv/microchip-icicle-kit.rst
+++ b/docs/system/riscv/microchip-icicle-kit.rst
@@ -65,7 +65,28 @@ should meet the following requirements:
   option.
 
 * It should contain a node for the CLINT device with a compatible string
-  "riscv,clint0".
+  "riscv,clint0" or "sifive,clint0".  Its ``interrupts-extended`` property
+  must describe the M-mode software interrupt (3) and timer interrupt (7) for
+  every hart, including the E51 hart 0.
+
+For example, the five-hart Icicle Kit CLINT node can be described as:
+
+.. code-block:: none
+
+    clint: clint@2000000 {
+        compatible = "sifive,fu540-c000-clint", "sifive,clint0";
+        reg = <0x0 0x2000000 0x0 0xc000>;
+        interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+                              <&cpu1_intc 3>, <&cpu1_intc 7>,
+                              <&cpu2_intc 3>, <&cpu2_intc 7>,
+                              <&cpu3_intc 3>, <&cpu3_intc 7>,
+                              <&cpu4_intc 3>, <&cpu4_intc 7>;
+    };
+
+Do not replace the hart 0 interrupt numbers with ``0xffffffff`` when the same
+DTB is used to initialize the generic OpenSBI platform.  OpenSBI derives the
+first hart and the number of CLINT register slots from these interrupt tuples;
+masking hart 0 would shift the per-hart MSIP and MTIMECMP register mappings.
 
 When ``-bios`` is not specified or set to ``default``, the OpenSBI
 ``fw_dynamic`` BIOS image for the ``generic`` platform is used to boot an
-- 
2.34.1