Re: [PATCH v2 2/2] ARM: dts: aspeed: Add ASRock Rack B650D4U BMC

Hi Prasanth,

On Thu, 2026-05-14 at 08:46 +0530, Prasanth Kumar Padarthi wrote:
> Add initial device tree support for the ASRock Rack B650D4U BMC.
> The B650D4U is a server motherboard utilizing the ASPEED AST2600
> SoC for management.
> 
> Signed-off-by: Prasanth Kumar Padarthi <[email protected]>
> ---
>  arch/arm/boot/dts/aspeed/Makefile             |  1 +
>  .../dts/aspeed/aspeed-bmc-asrock-b650d4u.dts  | 71 +++++++++++++++++++
>  2 files changed, 72 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts
> 
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index c4f064e4b..124d4f8f8 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>  	aspeed-bmc-asrock-romed8hm3.dtb \
>  	aspeed-bmc-asrock-spc621d8hm3.dtb \
>  	aspeed-bmc-asrock-x570d4u.dtb \
> +	aspeed-bmc-asrock-b650d4u.dtb \
>  	aspeed-bmc-asus-x4tf.dtb \
>  	aspeed-bmc-bytedance-g220a.dtb \
>  	aspeed-bmc-delta-ahe50dc.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts
> new file mode 100644
> index 000000000..130b7f3e0
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts
> @@ -0,0 +1,71 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +
> +/ {
> +	model = "ASRock Rack B650D4U BMC";
> +	compatible = "asrock,b650d4u-bmc", "aspeed,ast2600";
> +
> +	aliases {
> +		serial4 = &uart5;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial4:115200n8";
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x40000000>;
> +	};
> +};
> +
> +/* BMC Console UART */
> +&uart5 {
> +	status = "okay";
> +};
> +
> +/* SPI Flash Management */
> +&fmc {
> +	status = "okay";
> +	flash@0 {
> +		status = "okay";
> +		m25p,fast-read;
> +		label = "bmc";

Have you considered describing the flash layout here?

> +	};
> +};
> +
> +/* Dedicated Management LAN */
> +&mdio0 {
> +	status = "okay";
> +
> +	ethphy0: ethernet-phy@0 {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <0>;
> +	};
> +};
> +
> +&mac0 {
> +	status = "okay";
> +	phy-mode = "rgmii-rxid";
> +	phy-handle = <&ethphy0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
> +};
> +
> +/* I2C Bus for FRU/EEPROM Storage */
> +&i2c7 {
> +	status = "okay";
> +	eeprom@57 {
> +		compatible = "atmel,24c02";
> +		reg = <0x57>;
> +		pagesize = <16>;
> +	};
> +};
> +
> +/* System Watchdog */
> +&wdt1 {
> +	status = "okay";
> +	aspeed,reset-type = "soc";
> +};

My preference is that the nodes are ordered alphabetically by label
name. Can you please fix that? While it's also fine to order them e.g.
by unit address, alphabetical order is much easier for me to assess by
inspection.

Andrew