[PATCH v3 0/2] Add ASRock Rack B650D4U BMC

Prasanth Kumar Padarthi <[email protected]>
Newsgroups org.ozlabs.lists.linux-aspeed,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree
Message-ID <[email protected]>
Add initial devicetree support for the ASRock Rack B650D4U BMC,
an ASPEED AST2600-based server management controller.

Changes in v3:
- Reorder board DTS nodes alphabetically by label.
- Clarify that the management LAN PHY is an on-board discrete PHY.
- Keep MAC0 phy-mode as "rgmii-rxid" based on the extracted vendor DTB.
- Keep flash layout unspecified until it can be validated on hardware.

Changes in v2:
- Add MAC0 dedicated management LAN description with MDIO PHY at address 0.

Prasanth Kumar Padarthi (2):
  dt-bindings: arm: aspeed: Add ASRock Rack B650D4U
  ARM: dts: aspeed: Add ASRock Rack B650D4U BMC

 .../bindings/arm/aspeed/aspeed.yaml           |  1 +
 arch/arm/boot/dts/aspeed/Makefile             |  1 +
 .../dts/aspeed/aspeed-bmc-asrock-b650d4u.dts  | 71 +++++++++++++++++++
 3 files changed, 73 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-b650d4u.dts

-- 
2.47.3
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.