Re: [PATCH v3 2/7] dt-bindings: serial: 8250: aspeed: add aspeed,vuart-over-pci bool prop

On Tue, Jun 23, 2026 at 02:25:40PM +0000, Grégoire Layet wrote:
> The ASPEED AST2600 has 2 VUART accessible over PCI.

What does that mean? How UART can be accessible over PCI bus?


> This boolean can be set to specify if the VUART is used over PCI.
> 
> Signed-off-by: Grégoire Layet <[email protected]>
> ---
>  .../devicetree/bindings/serial/8250.yaml          | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
> index 3cbd0f532e15..b03797f4674d 100644
> --- a/Documentation/devicetree/bindings/serial/8250.yaml
> +++ b/Documentation/devicetree/bindings/serial/8250.yaml
> @@ -26,6 +26,14 @@ allOf:
>            anyOf:
>              - const: aspeed,ast2500-vuart
>              - const: aspeed,ast2600-vuart
> +  - if:
> +      anyOf:
> +        - required:
> +            - aspeed,vuart-over-pci
> +    then:
> +      properties:
> +        compatible:
> +          const: aspeed,ast2600-vuart
>    - if:
>        properties:
>          compatible:
> @@ -312,6 +320,13 @@ properties:
>        polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH). Only
>        applicable to aspeed,ast2500-vuart and aspeed,ast2600-vuart.
>  
> +  aspeed,vuart-over-pci:
> +    type: boolean
> +    default: false

There is no such syntax. Please do not introduce own style. Instead,
look at other files how this is done.

> +    description: |

Do not need '|' unless you need to preserve formatting.

> +      Enable the VUART over the BMC PCI device. Only applicable to
> +      aspeed,ast2600-vuart.

Best regards,
Krzysztof