Re: [PATCH v3 2/2] ARM: dts: aspeed: add asrock x470d4u bmc
Zev Weiss <[email protected]>
| Newsgroups | org.ozlabs.lists.linux-aspeed,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Hi Tan, Looks good overall to me, just a couple small notes below... On Wed, Aug 12, 2026 at 01:28:27PM PDT, Tan Siewert wrote: >The ASRock Rack X470D4U X470D4U is a single-socket X470-based microATX >motherboard for Ryzen processors with an AST2500 BMC and either 32MB or >64MB SPI flash. > >This mainboard exists in three known "flavors" which only differ in the >used host NIC, the BMC SPI size and some parts that may be un-populated. > >To allow the use of the full SPI flash, add two trees, one of which has >the 32M layout with the base config, and a 64M tree that includes the >base tree. > >Signed-off-by: Tan Siewert <[email protected]> >--- > arch/arm/boot/dts/aspeed/Makefile | 2 + > .../aspeed/aspeed-bmc-asrock-x470d4u-data64.dts | 15 + > .../boot/dts/aspeed/aspeed-bmc-asrock-x470d4u.dts | 381 +++++++++++++++++++++ > 3 files changed, 398 insertions(+) > >diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile >index 6b68671f9379..e27d33e85fb2 100644 >--- a/arch/arm/boot/dts/aspeed/Makefile >+++ b/arch/arm/boot/dts/aspeed/Makefile >@@ -15,6 +15,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-asrock-paul-ipmi-card.dtb \ > aspeed-bmc-asrock-romed8hm3.dtb \ > aspeed-bmc-asrock-spc621d8hm3.dtb \ >+ aspeed-bmc-asrock-x470d4u.dtb \ >+ aspeed-bmc-asrock-x470d4u-data64.dtb \ > aspeed-bmc-asrock-x570d4u.dtb \ > aspeed-bmc-asus-kommando-ipmi-card.dtb \ > aspeed-bmc-asus-x4tf.dtb \ >diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x470d4u-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x470d4u-data64.dts >new file mode 100644 >index 000000000000..6f11aeab087c >--- /dev/null >+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x470d4u-data64.dts >@@ -0,0 +1,15 @@ >+// SPDX-License-Identifier: GPL-2.0+ >+ >+#include "aspeed-bmc-asrock-x470d4u.dts" >+ >+/ { >+ compatible = "asrock,x470d4u-data64-bmc", "aspeed,ast2500"; >+ model = "Asrock Rack X470D4U-series BMC (64MB store)"; Nit: for consistency with how they spell it, and (at least *most* of) the other aspeed-bmc-asrock-*.dts files, I'd suggest "ASRock" instead of "Asrock". (And IMO s/store/flash/ would be a touch clearer.) Also, looks like the other nearby DTS files pretty consistently have compatible & model in the opposite order, so matching that might be nice too. >+}; >+ >+&fmc { >+ flash@0 { >+ /delete-node/partitions; >+#include "openbmc-flash-layout-64.dtsi" >+ }; >+}; >diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x470d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x470d4u.dts >new file mode 100644 >index 000000000000..80fb2b7c1e0c >--- /dev/null >+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x470d4u.dts <snip> >+ >+ fan@3 { >+ /* FAN4 (6-pin) */ >+ reg = <0x03>; >+ aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>; >+ }; >+ >+ fan@4 { >+ /* FAN5 (6-pin) */ >+ reg = <0x04>; >+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0d>; >+ }; >+ >+ fan@5 { >+ /* FAN6 (6-pin) */ >+ reg = <0x05>; >+ aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0e>; >+ }; >+}; Just to confirm, skipping channel 0xc here is intentional I assume? (Most other related platforms have them contiguously numbered, but not all, so another slight oddity wouldn't be too shocking.) Thanks, Zev