[PATCH v2 0/3] clk: qcom: use GATE_CLK_POLLED for CBCR-backed gate clocks

Convert CBCR-backed gate clocks in the sa8775p, sc7280, and qcs615
clock drivers from GATE_CLK() to GATE_CLK_POLLED(), so clock enable is
confirmed by polling the per-clock CBCR status bit instead of assuming
the enable write took effect immediately.

Signed-off-by: Balaji Selvanathan <[email protected]>
---
Changes in v2:
- keep the USB3 pipe and UFS TX/RX symbol clocks unpolled across
  sa8775p, sc7280, and qcs615; their CBCR only clears CLK_OFF once the
  QMP PHY is running, so polling them at GCC enable time would time out
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Balaji Selvanathan (3):
      clk: qcom: sa8775p: use GATE_CLK_POLLED for CBCR-backed gate clocks
      clk: qcom: sc7280: use GATE_CLK_POLLED for CBCR-backed gate clocks
      clk: qcom: qcs615: use GATE_CLK_POLLED for CBCR-backed gate clocks

 drivers/clk/qcom/clock-qcs615.c  | 38 ++++++++++++++-------------
 drivers/clk/qcom/clock-sa8775p.c | 36 +++++++++++++-------------
 drivers/clk/qcom/clock-sc7280.c  | 56 +++++++++++++++++++++-------------------
 3 files changed, 67 insertions(+), 63 deletions(-)
---
base-commit: de02bc0eccb76aec8272abed651c35ab120f4844
change-id: 20260723-clk_gate-1c5e54a8ae47

Best regards,
-- 
Balaji Selvanathan <[email protected]>