Re: [meta-freescale] imx51evk and u-boot

My boot stops here


U-Boot 2020.04-mz-imx_v2020.04_5.4.24_2.1.0+g4979a99482 (May 30 2020 - 
06:50:01 +0000)

CPU:   i.MX51 rev3.0 at 800 MHz
Reset cause: POR
Model: Freescale i.MX51 Babbage Board
Board: MX51EVK
DRAM:  512 MiB

Il 11/06/22 22:33, Fabio Estevam ha scritto:
> On Sat, Jun 11, 2022 at 2:50 PM Otavio Salvador
> <[email protected]> wrote:
>
>>> I'm trying to build Yocto dunfell for imx51evk derived board.
>>>
>>> The board has only sd card with 1 dram of ram.
> imx51evk has 512MB of RAM.
>
> You need to adapt the DDR for your specific board to be able to boot it.
>
>> It has been ages since I used those. @Fabio Estevam have you tried them lately?
> Yes, it boots well with the top of tree U-Boot:
>
> U-Boot 2022.07-rc4-00007-g57bd363de7 (Jun 11 2022 - 17:26:16 -0300)
>
> CPU:   Freescale i.MX51 rev3.0 at 800 MHz
> Reset cause: POR
> Model: Freescale i.MX51 Babbage Board
> Board: MX51EVK
> DRAM:  512 MiB
> Core:  20 devices, 9 uclasses, devicetree: separate
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... OK
> In:    serial
> Out:   serial
> Err:   serial
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#24840): https://lists.yoctoproject.org/g/meta-freescale/message/24840
> Mute This Topic: https://lists.yoctoproject.org/mt/91691849/3617482
> Group Owner: [email protected]
> Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub [[email protected]]
> -=-=-=-=-=-=-=-=-=-=-=-
>