Re: [meta-freescale] Anyone doing meta-freescale builds for imx93 evk yet? (imx93-11x11-lpddr4x-evk)

On Tue, Sep 5, 2023 at 8:01=E2=80=AFPM Brian Hutchinson <[email protected]=
om> wrote:
>
> Hi Daiane,
>
> On Tue, Sep 5, 2023 at 5:32=E2=80=AFPM Daiane Angolini
> <[email protected]> wrote:
> >
> > On Tue, Sep 5, 2023 at 4:21=E2=80=AFPM Brian Hutchinson <b.hutchman@gma=
il.com> wrote:
> > >
> > > Hi,
> > >
> > > I recently obtained a imx93 evk board and wanted to build fsl
> > > community bsp distro for it.
> > >
> > > I generated a core-image-base sdcard image using DISTRO=3Dpoky
> > > MACHINE=3Dimx93-11x11-lpddr4x-evk but it doesn't boot ... so sign of
> > > life on console ... no lights blinking, no u-boot output etc..
> >
> > Do you know which is the imx-boot you are using on your image? Are you
> > flashing the sdcard with a .wic? using uuu?
>
> Looks like it built u-boot-imx and is version 2022.04-r0
>
> I did a dd of the .wic.gz that core-image-base produced to a sdcard
> and set the dip switches to 0010 (also tried 1010) to boot from sdcard
> instead of eMMC.  The uncompressed .wic file size was 322611200.

I remember I got confused with the dip switches' orientation. But if
you have another working image, so your board is properly configured.

Daiane
>
> >
> > When I tested it, I used DISTRO=3Dfslc-framebuffer.
>
> I just rebuilt again from master and got same result.  Maybe I'll try
> same distro you did and see what happens.
>
> Thanks,
>
> Brian
>
> >
> > The last time I tested it worked fine.
> >
> > Daiane
> >
> > >
> > > I just want a minimal distro that supports a serial console (via the
> > > USB debug cable) and networking at the moment.  On imx8mm-evk I used
> > > core-image-base to start work on my own custom OS so thought that
> > > would be a good starting point with this imx93 board too but not sure
> > > meta-freescale fully supports the imx93 evk yet.  I built kirkstone
> > > and it had machine support and everything built ok, but maybe
> > > something else is missing.
> > >
> > > I searched the archives and I don't see any mention of the imx93 evk =
yet.
> > >
> > > Thanks!
> > >
> > > Brian
> > >
> > > -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-
> > > Links: You receive all messages sent to this group.
> > > View/Reply Online (#24924): https://lists.yoctoproject.org/g/meta-fre=
escale/message/24924
> > > Mute This Topic: https://lists.yoctoproject.org/mt/101177560/5992125
> > > Group Owner: [email protected]
> > > Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub [d=
[email protected]]
> > > -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-
> > >