Re: [meta-freescale] Anyone doing meta-freescale builds for imx93 evk yet? (imx93-11x11-lpddr4x-evk)

On Wed, Sep 6, 2023 at 7:49=E2=80=AFAM Daiane Angolini
<[email protected]> wrote:
>
> On Tue, Sep 5, 2023 at 8:01=E2=80=AFPM Brian Hutchinson <b.hutchman@gmail=
.com> wrote:
> >
> > Hi Daiane,
> >
> > On Tue, Sep 5, 2023 at 5:32=E2=80=AFPM Daiane Angolini
> > <[email protected]> wrote:
> > >
> > > On Tue, Sep 5, 2023 at 4:21=E2=80=AFPM Brian Hutchinson <b.hutchman@g=
mail.com> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I recently obtained a imx93 evk board and wanted to build fsl
> > > > community bsp distro for it.
> > > >
> > > > I generated a core-image-base sdcard image using DISTRO=3Dpoky
> > > > MACHINE=3Dimx93-11x11-lpddr4x-evk but it doesn't boot ... so sign o=
f
> > > > life on console ... no lights blinking, no u-boot output etc..
> > >
> > > Do you know which is the imx-boot you are using on your image? Are yo=
u
> > > flashing the sdcard with a .wic? using uuu?
> >
> > Looks like it built u-boot-imx and is version 2022.04-r0
> >
> > I did a dd of the .wic.gz that core-image-base produced to a sdcard
> > and set the dip switches to 0010 (also tried 1010) to boot from sdcard
> > instead of eMMC.  The uncompressed .wic file size was 322611200.
>
> I remember I got confused with the dip switches' orientation. But if
> you have another working image, so your board is properly configured.
>
Which image did you build?  I rebuilt core-image-base from master
using DISTRO=3Dfslc-framebuffer and once again got the same result ...
no sign of board booting so I must be missing something or not doing
something right.

Regards,

Brian

> Daiane
> >
> > >
> > > When I tested it, I used DISTRO=3Dfslc-framebuffer.
> >
> > I just rebuilt again from master and got same result.  Maybe I'll try
> > same distro you did and see what happens.
> >
> > Thanks,
> >
> > Brian
> >
> > >
> > > The last time I tested it worked fine.
> > >
> > > Daiane
> > >
> > > >
> > > > I just want a minimal distro that supports a serial console (via th=
e
> > > > USB debug cable) and networking at the moment.  On imx8mm-evk I use=
d
> > > > core-image-base to start work on my own custom OS so thought that
> > > > would be a good starting point with this imx93 board too but not su=
re
> > > > meta-freescale fully supports the imx93 evk yet.  I built kirkstone
> > > > and it had machine support and everything built ok, but maybe
> > > > something else is missing.
> > > >
> > > > I searched the archives and I don't see any mention of the imx93 ev=
k yet.
> > > >
> > > > Thanks!
> > > >
> > > > Brian
> > > >
> > > > -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-
> > > > Links: You receive all messages sent to this group.
> > > > View/Reply Online (#24924): https://lists.yoctoproject.org/g/meta-f=
reescale/message/24924
> > > > Mute This Topic: https://lists.yoctoproject.org/mt/101177560/599212=
5
> > > > Group Owner: [email protected]
> > > > Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub =
[[email protected]]
> > > > -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-
> > > >