Question about iinterrupts and running from ram

I am atmepting to debug my app from ram. I can not get it to go into 
my ISR that I have set up for the PIT. How ever I put some test code 
in to just check to see if the PIT went off and set an interrupt and 
it does, so I clear it and signal on the SCI that I got and interrupt 
but it never goes into the ISR. My question is do I have to do 
anything special with the vector table relocation or anything such as 
that to debug from ram? I am using a Phytec demo for the MPC565. So 
far I can make it do most anything I want but hit an ISR.

Thanks in advance for any help,
Tim






-----------------------------------------------------------
To learn more about Freescale Microcontrollers, please visit
http://www.freescale.com/mcu


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/MPC500/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/MPC500/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:[email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/