OpenBrick-ng seem to be "Nagasaki MiniPC MS-2600-4COM"

Yes this are the same PCs.

I ordered 2 from Nexedi; then three MS-2600 through "U.S.A Distributor -=20
Nagasaki IPC Technology" and i was delivered in time (about 1400 $USD=20
for 3 x MS 2600, including shipping cost)

Please tell us if you can buy it at a good price from German or Benelux=20
or French Nagasaki reseller.

----- Forwarded by Michel Vansaing=E8le on 09/06/2005 11:08 -----
Axel Grossklaus <[email protected]>
Sent by: [email protected]
25/05/2005 14:43   =20
To
[email protected]
cc

Subject
[Openbrick] OpenBrick-ng seem to be "Nagasaki MiniPC MS-2600-4COM"
   =20

   =20
moin,

just in case anyone is interested: the OpenBrick-ng seem to be
made by Nagasaki as "Nagasaki MiniPC MS-2600-4COM"

http://www.nagasaki.com.tw/02pd/minipc=5F2600=5F4com.html

they contain a nagasaki embedded board "NASA-6822VLLA" (i verified
this on an actual openbrick-ng. the board says "nasa-6822".)

specs: http://www.nagasaki.com.tw/6-PTF/NA-6822.pdf
user manual:
http://www.nagasaki.com.tw/7-User's%20Manual/embedded/NASA-6822.pdf

these documents contain a little more interesting and clear information
than the page openbrick-ng ordering page.

like the fact that there are daughterboards for a compact flash slot,
a pcmcia slot and a hard-disk bay  or even a GPS module are available
or that the system has an internal IDE connector. or that "flash disk"
means  DOMs (Disk On Module) which are ide-compatible flash disks
(rather than compact flash modules)." power supplies for different
settings like cars/boats etc are also available.


nagasaki also has distributors all around the world...



tty, axel


=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
Openbrick mailing list
[email protected]
http://www.openbrick.org/mailman/listinfo/openbrick